parachute dynamics simulation
 

Mesh Quality:

Minimum Orthogonal Quality = 9.05742e-04 cell 12017 on zone 6 (ID: 12018 on partition: 0) at location (-1.12565e-01 1.24336e+01 2.98048e+00)
(To improve Orthogonal quality , use "Inverse Orthogonal Quality" in Fluent Meshing,
where Inverse Orthogonal Quality = 1 - Orthogonal Quality)
Warning: minimum Orthogonal Quality below 0.01.

Maximum Aspect Ratio = 1.75935e+02 cell 720718 on zone 3 (ID: 733370 on partition: 0) at location (-6.39347e-02 1.24552e+01 2.99726e+00)

Fluent can try to improve the mesh quality via the TUI command
/mesh/repair-improve/improve-quality


how to improve the mesh quality? How to make this error solved