CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

Temperature limited to problem.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 7, 2021, 11:18
Default Temperature limited to problem.
  #1
New Member
 
Gaurav Kumar
Join Date: Jan 2018
Location: Delhi
Posts: 17
Rep Power: 6
gauravkmr is on a distinguished road
Hi everyone,
I am simulating a pipe flow system with inlet temperature and mass flow water with properties changing with temperature. I have made udf for properties. Pipe have a central rod in it where it is generating a constant heat flux in the inner boundary wall of rod. Flow is flowing with a constant pressure of 25 MPa..
When I start the calculations, after 10-15 iterations it is showing temperature limited to..problem with higher limit to some cells and lower limit to some cells... I am monitoring the volume average temperatures of rod. It is increasing and not remain constant.. The other residuals are converged. In post processing the temperature profile of rod is very absurd, with high values of temperature upto 1000 deg Celsius, while it should be around 450-500 deg Celsius. What should I do??
gauravkmr is offline   Reply With Quote

Old   December 7, 2021, 13:48
Default
  #2
Senior Member
 
Erik
Join Date: Feb 2011
Location: Earth (Land portion)
Posts: 1,081
Rep Power: 20
evcelica is on a distinguished road
Check your material properties and inlet/outlet flows and temps and energy balances.

Try using standard constant property water to see if material properties are incorrect.
evcelica is offline   Reply With Quote

Old   December 12, 2021, 08:38
Default
  #3
New Member
 
Gaurav Kumar
Join Date: Jan 2018
Location: Delhi
Posts: 17
Rep Power: 6
gauravkmr is on a distinguished road
Thanks for the reply, I have checked everything but still it is giving the same problem
gauravkmr is offline   Reply With Quote

Old   December 27, 2021, 02:03
Default
  #4
New Member
 
Join Date: Jun 2021
Posts: 6
Rep Power: 2
anan12345 is on a distinguished road
Did you try to run the simulation without UDF?
anan12345 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mesh& steptime independant: conduction-convection problem Fati1 Main CFD Forum 1 October 28, 2018 14:52
problem in temperature and liquid fraction value in the udf durg FLUENT 0 October 23, 2018 02:52
the problem that gradually change of temperature contour in coal gasification bluenail FLUENT 0 November 10, 2014 03:41
UDF for Back-flow Temperature G340 Fluent UDF and Scheme Programming 3 August 21, 2013 05:56
Problem when adding temperature to interFoam houkensjtu OpenFOAM 4 November 5, 2012 03:35


All times are GMT -4. The time now is 14:09.