blood flow in brain

snudurupati · June 16, 2009, 11:48

I am starting a new project of blood flow in brain.

I want to know if Fluent/Ansys can handle the moving boundary condition problem with rigid walls. Also as a first phase project it is only going to be newtonian fluid.

I do have a 3-D meshed model of heart so I just need to import it.

Please advice for any other suitable CFD software as I have not yet started working

John · June 18, 2009, 10:33

Just curious, what's the "moving boundary condition problem on rigid wall"?

snudurupati · June 19, 2009, 10:07

It's my bad. first it is going to be rigid walls and then in the further analysis it will be a viscoelastic or similar and then comes the moving boundary I guess.

I have just started working and I am not sure if I am correct. Do you have any knowledge working with FSI??

thank you in advance.

John · July 7, 2009, 11:33

regarding FSI modeling of blood flow, the following link may be helpful.

http://www.roieng.com/files/fsi-11.pdf

canciger · July 7, 2009, 19:35

Ansys Multiphysics is the easiest and robust way to go. Multiphysics come with CFX and Ansys Mechanical to perform FSI with a very easy setup.
We use it every day. Fluent can of course do the same but not as easy as Ansys-CFX combination yet. Though it is in the plans to have more easy 2 way FSI setup for Fluent as well.

June 16, 2009, 11:48	blood flow in brain	#1
snudurupati New Member sai Join Date: Jun 2009 Location: New Jersey Posts: 9 Rep Power: 16	I am starting a new project of blood flow in brain. I want to know if Fluent/Ansys can handle the moving boundary condition problem with rigid walls. Also as a first phase project it is only going to be newtonian fluid. I do have a 3-D meshed model of heart so I just need to import it. Please advice for any other suitable CFD software as I have not yet started working

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pulsatile blood flow	John H	FLUENT	7	March 3, 2022 07:50
Modeling blood flow - FloWorks	mcneelyd	FloEFD, FloWorks & FloTHERM	2	June 15, 2009 12:53
FLUENT BLOOD FLOW RATE	Christoforos	FLUENT	0	September 18, 2008 10:08
3D pulsatile blood flow UDF	Michal	Main CFD Forum	0	February 25, 2005 07:18
Fluent blood flow BC	Michal	Main CFD Forum	3	February 17, 2005 03:17

June 18, 2009, 10:33		#2
John Member Join Date: Mar 2009 Posts: 49 Rep Power: 17	Just curious, what's the "moving boundary condition problem on rigid wall"?

June 19, 2009, 10:07		#3
snudurupati New Member sai Join Date: Jun 2009 Location: New Jersey Posts: 9 Rep Power: 16	It's my bad. first it is going to be rigid walls and then in the further analysis it will be a viscoelastic or similar and then comes the moving boundary I guess. I have just started working and I am not sure if I am correct. Do you have any knowledge working with FSI?? thank you in advance.

July 7, 2009, 11:33		#4
John Member Join Date: Mar 2009 Posts: 49 Rep Power: 17	regarding FSI modeling of blood flow, the following link may be helpful. http://www.roieng.com/files/fsi-11.pdf

July 7, 2009, 19:35		#5
canciger New Member Can Ozcan Join Date: Jul 2009 Location: Istanbul Posts: 4 Rep Power: 16	Ansys Multiphysics is the easiest and robust way to go. Multiphysics come with CFX and Ansys Mechanical to perform FSI with a very easy setup. We use it every day. Fluent can of course do the same but not as easy as Ansys-CFX combination yet. Though it is in the plans to have more easy 2 way FSI setup for Fluent as well.