CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS (https://www.cfd-online.com/Forums/ansys/)
-   -   Ansys FLOTRAN. Remeshing according velocity vectors or streamlines? (https://www.cfd-online.com/Forums/ansys/69718-ansys-flotran-remeshing-according-velocity-vectors-streamlines.html)

 pablo--- November 2, 2009 07:51

Ansys FLOTRAN. Remeshing according velocity vectors or streamlines?

Thanks everybody this forum is wonderfull, let me ask you something about FLOTRAN:

I´d like solve an easy problem consisting of a liquid flow through a rectangular duct (2d,fluid141) passing around and elliptical obstacle (solid) like this:

http://s4.subirimagenes.com/otros/pr...1096dibujo.jpg

My questions are:

1) As exactly was defined in the draw from above is it possible to obtain with flotran the trajectory of mass flow around a solid obstacle? Do I have to define that ellipse as a solid material and running this as multisolver analysis or its enough define the ellipse as a "hole" in the middle of the liquid because I´m only interesting on the trajectory of the mass flow not in the interaction with the solid.

2) Is there any way to remesh the liquid mesh according the direction of the velocity vectors or streamlines?

3) Is it possible carrying out such analysis on 3d using only flotran.

Sorry for the questions Im a begginer, thank you very much for your answers.

 mechanicaldesign December 11, 2009 02:58

Hi pablo---,

I can't open your picture. Please send me, on my personal email, some pictures, or an short PowerPoint with your study which you want to study, with some short description.;)

Best regards.

 pablo--- December 11, 2009 05:35

Quote:
 Originally Posted by mechanicaldesign (Post 239582) Hi pablo---, I can't open your picture. Please send me, on my personal email, some pictures, or an short PowerPoint with your study which you want to study, with some short description.;) Best regards.
the problem has already solved, but thanks a lot mechanicaldesign.

 All times are GMT -4. The time now is 06:09.