CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

anisotropy for FSI of artery

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 11, 2010, 19:27
Default anisotropy for FSI of artery
  #1
New Member
 
Erick Johnson
Join Date: May 2009
Posts: 4
Rep Power: 16
eljohnso is on a distinguished road
I can't seem to find a resource or tutorial that explains how anisotropic material properties are used within ANSYS, especially in regards to FSI with CFX and blood vessels. The help files give a tiny bit of information on anisotropic, hyperelastic models; but I don't see it being enough to apply to more than a cylinder.

My thought was that I could create a single material model and then apply individual coordinate frames to each element of the vessel wall (which would ideally give a different component breakdown of the strain for each element), but I haven't figured a way to do that.

-Are users relying on a single coordinate frame for the entire model (it doesn't make sense for complicated geometry that doesn't follow an axis)?
-If not, how are the principle directions being determined (or material model modified) and applied?
-Is there a different, fully-coupled FSI, package that would make more sense to use for this problem?

Thanks in advance for any help,

Erick
eljohnso is offline   Reply With Quote

Reply

Tags
anisotropy, ansys, bio, fsi

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Backward flow in an artery when k-e is applied Amy FLUENT 0 March 27, 2008 13:07
Grid generation for artery flow domain Anne Main CFD Forum 2 January 26, 2005 09:21
Modeling Dilation/Constriction of Artery P. Gadhoke FLUENT 0 April 19, 2004 20:43
1-D model for blood flow in artery Robert Lichtenshtein Main CFD Forum 1 December 19, 2002 16:33


All times are GMT -4. The time now is 16:01.