Importing Gridgen into Fluent

travis.moulding · March 31, 2010, 18:33

I am a new user and I am having a real hard time importing my mesh that I made in Gridgen into Fluent. I have tried to export the grid points, surfaces, in Nastran, Patran, Plot3D with no luck. Can anybody tell me how I should export the mesh so that I can import it into Fluent.
Thanks in advance!

rmatus · March 31, 2010, 19:19

In Gridgen, go to the Analysis Software commands menu. Choose Fluent as your analysis software, then Export Analysis Data. Gridgen will write a Fluent .cas file you can read directly in Fluent.

Let me know if that gives you any problems.

travis.moulding · April 1, 2010, 09:16

rmatus, thanks for the info. I did what your saying but when I go t the export command, the "Export Analysis Data" is greyed out. Is there somthing I'm missing?

gracerlima · April 1, 2010, 19:53

Hi Travis,

try do describe here all the steps you are taking along the mesh generation process...It will be better for us to figure out what is missing!!!

I will try to help you!

rmatus · April 5, 2010, 09:38

Travis:

The Export Analysis Data button will be greyed out unless you have created some blocks. In Gridgen, only blocks can be exported as analysis data. This is true even for 2D grids, for which you build 2D blocks, or collections of domains.

Other than that, I can't think of what would cause that button to be greyed out. If you can provide additional details about the steps you are taking maybe I can help more.

March 31, 2010, 18:33	Importing Gridgen into Fluent	#1
travis.moulding New Member Travis Moulding Join Date: Mar 2010 Posts: 7 Rep Power: 16	I am a new user and I am having a real hard time importing my mesh that I made in Gridgen into Fluent. I have tried to export the grid points, surfaces, in Nastran, Patran, Plot3D with no luck. Can anybody tell me how I should export the mesh so that I can import it into Fluent. Thanks in advance!

March 31, 2010, 19:19	Use the Fluent ASW	#2
rmatus Senior Member Rick Matus Join Date: Mar 2009 Location: Fort Worth, Texas, USA Posts: 116 Rep Power: 17	In Gridgen, go to the Analysis Software commands menu. Choose Fluent as your analysis software, then Export Analysis Data. Gridgen will write a Fluent .cas file you can read directly in Fluent. Let me know if that gives you any problems.

April 5, 2010, 09:38	Made any blocks yet?	#5
rmatus Senior Member Rick Matus Join Date: Mar 2009 Location: Fort Worth, Texas, USA Posts: 116 Rep Power: 17	Travis: The Export Analysis Data button will be greyed out unless you have created some blocks. In Gridgen, only blocks can be exported as analysis data. This is true even for 2D grids, for which you build 2D blocks, or collections of domains. Other than that, I can't think of what would cause that button to be greyed out. If you can provide additional details about the steps you are taking maybe I can help more.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Importing Gambit data into Fluent	Tyred	ANSYS Meshing & Geometry	1	April 18, 2009 13:53
Negative volumes using Gridgen in Fluent 6.1	Tom	FLUENT	2	November 8, 2005 06:20
Gridgen and Fluent	Matt	FLUENT	2	September 19, 2005 12:25
A error about importing Gambit mesh to Fluent.	shin	FLUENT	3	November 19, 2002 02:09
Importing a structured mesh into Fluent	Flav	FLUENT	0	November 30, 1999 10:57

April 1, 2010, 09:16		#3
travis.moulding New Member Travis Moulding Join Date: Mar 2010 Posts: 7 Rep Power: 16	rmatus, thanks for the info. I did what your saying but when I go t the export command, the "Export Analysis Data" is greyed out. Is there somthing I'm missing?

April 1, 2010, 19:53		#4
gracerlima New Member Grace Lima Join Date: Mar 2010 Posts: 7 Rep Power: 16	Hi Travis, try do describe here all the steps you are taking along the mesh generation process...It will be better for us to figure out what is missing!!! I will try to help you!