CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

fluent warning

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree25Likes

Reply
Page 1 of 2 1 2
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 29, 2010, 06:51
Default fluent warning
  #1
Member
 
Join Date: Dec 2009
Location: China
Posts: 79
Rep Power: 17
ringtail is on a distinguished road
Dear all, I am getting the following warning while I import the mesh into FLUENT 12.1. The mesh is generated by ICEM CFD v12.1, and it is 2D.

Warning information:

130106 nodes.
129291 quadrilateral cells, zone 10.
257765 2D interior faces, zone 11.
155 2D wall faces, zone 12.
577 2D wall faces, zone 13.
196 2D wall faces, zone 14.
706 2D pressure-far-field faces, zone 15.

Building...
mesh
materials,
interface,
domains,
zones,
outer
flap
main
slat
int_solid
solid
Warning: Flow boundary zone 15 is adjacent to a solid
zone (10). This problem MUST be fixed before
solution can proceed!

Done.

Preparing mesh for display...
Done.

What should I do? Any one can help me?
thank you.
ringtail is offline   Reply With Quote

Old   June 29, 2010, 11:09
Default
  #2
New Member
 
Luk
Join Date: Jun 2009
Posts: 24
Rep Power: 17
Geisel is on a distinguished road
Change solid into fluid
__________________
*******************************
Geisel is offline   Reply With Quote

Old   June 29, 2010, 12:16
Default
  #3
Member
 
Join Date: Dec 2009
Location: China
Posts: 79
Rep Power: 17
ringtail is on a distinguished road
Quote:
Originally Posted by Geisel View Post
Change solid into fluid
I have solved it. you are right.
thanks.
ringtail is offline   Reply With Quote

Old   September 2, 2010, 21:59
Default
  #4
New Member
 
Rohan
Join Date: Sep 2010
Posts: 8
Rep Power: 16
tejas.khetani is on a distinguished road
Hey Ringtell,
Can you tell me where I am suppose to change Solid into Fluid???
I am asking as I am facing same problem as yours which says
Warning: Flow boundary zone 5 is adjacent to a solid
zone (2). This problem MUST be fixed before
solution can proceed!
tejas.khetani is offline   Reply With Quote

Old   September 2, 2010, 23:16
Default
  #5
Member
 
Join Date: Dec 2009
Location: China
Posts: 79
Rep Power: 17
ringtail is on a distinguished road
Quote:
Originally Posted by tejas.khetani View Post
Hey Ringtell,
Can you tell me where I am suppose to change Solid into Fluid???
I am asking as I am facing same problem as yours which says
Warning: Flow boundary zone 5 is adjacent to a solid
zone (2). This problem MUST be fixed before
solution can proceed!
Problem setup --> cell zone conditions --> change the zone type of computation domain to fluid.
SAH, dale154, Nikoonz and 2 others like this.
ringtail is offline   Reply With Quote

Old   September 2, 2010, 23:56
Default
  #6
New Member
 
Rohan
Join Date: Sep 2010
Posts: 8
Rep Power: 16
tejas.khetani is on a distinguished road
Thanks Man...It worked...
tejas.khetani is offline   Reply With Quote

Old   December 4, 2011, 18:13
Default fluent warning
  #7
New Member
 
san
Join Date: Dec 2011
Posts: 3
Rep Power: 15
sandycbe is on a distinguished road
I am using fluent 6.3.26.. I am also getting the error Warning: Flow boundary zone 5 is adjacent to a solid
zone (2). This problem MUST be fixed before
solution can proceed!

Can anybody help me in this...
Thanks in advance...
Abdulrajak Buradi likes this.
sandycbe is offline   Reply With Quote

Old   December 4, 2011, 18:24
Default sandycbe
  #8
New Member
 
Rohan
Join Date: Sep 2010
Posts: 8
Rep Power: 16
tejas.khetani is on a distinguished road
please try this one,....

Problem setup --> cell zone conditions --> change the zone type of computation domain to fluid.
Boreas, Abdulrajak Buradi and Nikoonz like this.
tejas.khetani is offline   Reply With Quote

Old   December 4, 2011, 18:33
Default
  #9
New Member
 
san
Join Date: Dec 2011
Posts: 3
Rep Power: 15
sandycbe is on a distinguished road
but i cant find the problem setup option in fluent 6.3.26...
i dont know how to do that... can you help me in this...
sandycbe is offline   Reply With Quote

Old   December 4, 2011, 22:06
Default sandycbe
  #10
New Member
 
Rohan
Join Date: Sep 2010
Posts: 8
Rep Power: 16
tejas.khetani is on a distinguished road
Hey this attachments might help you.
Attached Images
File Type: jpg Untitled.jpg (33.9 KB, 705 views)
Abdulrajak Buradi and Nikoonz like this.
tejas.khetani is offline   Reply With Quote

Old   December 5, 2011, 00:48
Default
  #11
New Member
 
san
Join Date: Dec 2011
Posts: 3
Rep Power: 15
sandycbe is on a distinguished road
thank you tejas.khetani....
sandycbe is offline   Reply With Quote

Old   April 23, 2012, 16:54
Default
  #12
New Member
 
Justin Flanders
Join Date: Oct 2010
Posts: 6
Rep Power: 16
MetalSupremacist is on a distinguished road
Quote:
Originally Posted by Geisel View Post
Change solid into fluid
This seems to be a simple solution. But what if the solid zone is actually suppose to be solid?
MetalSupremacist is offline   Reply With Quote

Old   December 25, 2016, 15:37
Default
  #13
New Member
 
fahimeh
Join Date: May 2016
Location: Tehran, Iran
Posts: 9
Rep Power: 10
f.kh is on a distinguished road
Quote:
Originally Posted by MetalSupremacist View Post
This seems to be a simple solution. But what if the solid zone is actually suppose to be solid?
Hi,
sorry did you get the answer?
the solid zone of my computation is actually solid (Aluminum), so it is not logical to change it to a fluid zone, so what's the solution?

regards,
Fahimeh
f.kh is offline   Reply With Quote

Old   July 24, 2017, 22:52
Default
  #14
New Member
 
Ajaysinh Solanki
Join Date: Jul 2017
Posts: 3
Rep Power: 9
solanki004 is on a distinguished road
Quote:
Originally Posted by f.kh View Post
Hi,
sorry did you get the answer?
the solid zone of my computation is actually solid (Aluminum), so it is not logical to change it to a fluid zone, so what's the solution?

regards,
Fahimeh
Did you solve the problem??


Thanks and regards,
Ajay
solanki004 is offline   Reply With Quote

Old   July 24, 2017, 22:53
Default
  #15
New Member
 
Ajaysinh Solanki
Join Date: Jul 2017
Posts: 3
Rep Power: 9
solanki004 is on a distinguished road
Quote:
Originally Posted by f.kh View Post
Hi,
sorry did you get the answer?
the solid zone of my computation is actually solid (Aluminum), so it is not logical to change it to a fluid zone, so what's the solution?

regards,
Fahimeh
Did you get an answer??

regard,
Ajay.
solanki004 is offline   Reply With Quote

Old   February 27, 2018, 10:10
Default
  #16
New Member
 
Punjab
Join Date: Feb 2016
Posts: 2
Rep Power: 0
Asjad is on a distinguished road
has anyone able to solve this problem? I am still getting this error
Asjad is offline   Reply With Quote

Old   May 26, 2019, 05:44
Default
  #17
New Member
 
J HAN
Join Date: May 2019
Posts: 1
Rep Power: 0
han203 is on a distinguished road
Quote:
Originally Posted by MetalSupremacist View Post
This seems to be a simple solution. But what if the solid zone is actually suppose to be solid?
The problem happened in the meshing process. Because you don't choose the right face as a boundary. If your model contains 3 bodies, and you have to choose and name a face in one of the bodies, you'd better hide the other two bodies so that you don't choose the wrong face. The flow boundary id is the wrong face you chose. Go back to your meshing software and rechoose the face, then there would be no problem.
han203 is offline   Reply With Quote

Old   April 8, 2020, 18:36
Thumbs up Thank you so much
  #18
New Member
 
Debdoot Ghosh
Join Date: Apr 2020
Posts: 2
Rep Power: 0
Debdoot_X is on a distinguished road
It worked!!
Debdoot_X is offline   Reply With Quote

Old   July 15, 2020, 12:58
Default
  #19
New Member
 
Vignesh
Join Date: Jul 2020
Posts: 1
Rep Power: 0
Vignesh5710 is on a distinguished road
Quote:
Originally Posted by tejas.khetani View Post
Hey this attachments might help you.
Hope this give better clarity!
Vignesh5710 is offline   Reply With Quote

Old   August 8, 2020, 12:02
Default
  #20
New Member
 
PUTERI NURFARAH
Join Date: Aug 2020
Posts: 1
Rep Power: 0
Puteri Farah Taslin is on a distinguished road
hi. i cannot find the problem setup in my fluent. mine if 18.1.0 version. please help. thanks!
Puteri Farah Taslin is offline   Reply With Quote

Reply
Page 1 of 2 1 2

« Previous Thread | Next Thread »
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[blockMesh] BlockMesh FOAM warning gaottino OpenFOAM Meshing & Mesh Conversion 7 July 19, 2010 15:11
Compilation errors in ThirdPartymallochoard feng_w OpenFOAM Installation 1 January 25, 2009 07:59
Add icoLagrangianFoam to FoamX dyxu OpenFOAM Running, Solving & CFD 10 June 11, 2008 10:53
FLUENT Warning Jordi FLUENT 0 April 21, 2006 05:41
Warning 097- AB Siemens 6 November 15, 2004 05:41


All times are GMT -4. The time now is 15:05.

Contact Us - CFD Online - Privacy Statement - Top