CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS (https://www.cfd-online.com/Forums/ansys/)
-   -   Urgent help plzzzzz. (https://www.cfd-online.com/Forums/ansys/79821-urgent-help-plzzzzz.html)

hudda September 5, 2010 13:20
Urgent help plzzzzz.
 
After I install ANSYS at my company, the user keep getting warning message says that
“can’t find user’s home. Could not save the configuration file! To avoid this message, define or check the environment variable HOMEDIR to local directory.
POLYFLOW - what can i do to resolve your quick respond is appreciated.
Hudda
:mad:

a.m. September 5, 2010 14:23
you should check the environment variable HOMEDIR :) (windows environment variable)

hudda September 5, 2010 14:30
Thank you for your reply, but How???

hudda September 5, 2010 14:31
Quote:
Originally Posted by a.m. (Post 274074)
you should check the environment variable HOMEDIR :) (windows environment variable)
Thank you for reply, but :confused:How??

a.m. September 5, 2010 14:41
my computer --> properties --> advanced --> environment variables

hudda September 5, 2010 15:02
Quote:
Originally Posted by a.m. (Post 274078)
my computer --> properties --> advanced --> environment variables
Thank you so much, so it should be
%HOMEDRIVE% C: The drive letter associated with the user's home directory
if that it the case my problem solve a.m.

Appreciated!! I will update you!

hudda September 6, 2010 12:08
Quote:
Originally Posted by a.m. (Post 274078)
my computer --> properties --> advanced --> environment variables
No :mad: it did not work, I thought it is a permission problem I gave the folder full permission for user still not able to save the message says. I do not know what to do...................any other thought plz let me know.

thanks
Hudda

a.m. September 6, 2010 13:29
may be it will be useful:

ANSYS 12.1 Help

"3.4.*Post-Installation Procedures

Set the home directory. To set a home directory in Windows, you need to set a HOMEDRIVE environment variable to the desired drive letter (including the colon) and a HOMEPATH environment variable to the desired path. For example:
HOMEDRIVE=C:
HOMEPATH=\Users\Mine"

you can find another Post-Installation Procedures. see help.

Good luck.

hudda September 6, 2010 19:59
Quote:
Originally Posted by a.m. (Post 274207)
may be it will be useful:

ANSYS 12.1 Help

"3.4.*Post-Installation Procedures

Set the home directory. To set a home directory in Windows, you need to set a HOMEDRIVE environment variable to the desired drive letter (including the colon) and a HOMEPATH environment variable to the desired path. For example:
HOMEDRIVE=C:
HOMEPATH=\Users\Mine"

you can find another Post-Installation Procedures. see help.

Good luck.
Thank you I did that, I will check it again, :(

Hudda

hudda September 10, 2010 09:23
Quote:
Originally Posted by a.m. (Post 274207)
may be it will be useful:

ANSYS 12.1 Help

"3.4.*Post-Installation Procedures

Set the home directory. To set a home directory in Windows, you need to set a HOMEDRIVE environment variable to the desired drive letter (including the colon) and a HOMEPATH environment variable to the desired path. For example:
HOMEDRIVE=C:
HOMEPATH=\Users\Mine"

you can find another Post-Installation Procedures. see help.

Good luck.
Thank you very much for your time, I escalated to different department let them figure it out.

Hudda


All times are GMT -4. The time now is 02:03.