|
[Sponsors] |
![]() |
![]() |
#1 |
Member
Join Date: Jan 2011
Posts: 37
Rep Power: 16 ![]() |
Hi, is there any simple way of determining the Reynolds number, or any non-dimensional number for that matter, at a point in a flow using ANSYS Workbench 13?
|
|
![]() |
![]() |
![]() |
![]() |
#2 |
New Member
Bill Wangard
Join Date: Jan 2011
Posts: 21
Rep Power: 0 ![]() |
Create a custom field function: Define it as "density * velocity-magnitude / viscosity"
Then obtain the value at a point using a point-monitor. The reynolds number at that point is equal to the value of the custom field function TIMES a length scale. Make sure your length scale makes sense. Regards, Bill Wangard, Ph.D. President Engrana LLC |
|
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
[mesh manipulation] Mesh Refinement | Luiz Eduardo Bittencourt Sampaio (Sampaio) | OpenFOAM Meshing & Mesh Conversion | 42 | January 8, 2017 12:55 |
DecomposePar unequal number of shared faces | maka | OpenFOAM Pre-Processing | 6 | August 12, 2010 09:01 |
[blockMesh] BlockMeshmergePatchPairs | hjasak | OpenFOAM Meshing & Mesh Conversion | 11 | August 15, 2008 07:36 |
Unaligned accesses on IA64 | andre | OpenFOAM | 5 | June 23, 2008 10:37 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |