CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

Troubleshooting. Please Help

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 9, 2011, 05:32
Default Troubleshooting. Please Help
  #1
New Member
 
Mark TTY
Join Date: Aug 2010
Posts: 1
Rep Power: 0
marktty is on a distinguished road
Hi,

I'm currently doing a CFD study on a Double pass Solar Collector.

I've done a basic design which just has an inlet flow and outlet flow only.

I managed to get the contours but the inlet flow doesn't make sense.

The inflow is set to 15m/s but from the graphical representation, the inlet starts from 0.

did i miss out any information during the setup?

please advise.

marktty is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Troubleshooting probe and average functions with Angular Velocity siardica CFX 20 October 7, 2013 07:54
CFX Contour Plots Troubleshooting derz CFX 7 November 21, 2010 11:08
Troubleshooting Unsteady Incompressible Flow Solver dandalf Main CFD Forum 0 November 15, 2010 11:55
[Gmsh] gmshToFoam troubleshooting ericnutsch OpenFOAM Meshing & Mesh Conversion 3 August 27, 2010 12:11
Gambit modeling troubleshooting Ng FLUENT 1 March 18, 2005 05:33


All times are GMT -4. The time now is 06:12.