|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
Ahmad Zein
Join Date: Feb 2011
Posts: 4
Rep Power: 16 ![]() |
Dear all,
Does any one has any tutorial for simulating a VAWT on ANSYS . I am a mechanical engineer student and i am stuck with my final year project. Your help will mean a lot for me. Thank you all and Best regards Jack Wilson |
|
![]() |
![]() |
![]() |
![]() |
#2 | |
Senior Member
Raashid Baig
Join Date: Mar 2010
Location: Bangalore, India
Posts: 135
Rep Power: 17 ![]() |
Quote:
I really doubt that anything like that will be available for VAWT. I suggest you should take a look at the following papers for HAWT, which will give you valuable information about wind turbine simulations. "Predicting 2D Airfoil and 3D Wind Turbine Rotor Performance using a Transition Model for General CFD Codes", R. Langtry, J. Gola and F. Menter, ANSYS CFX, Otterfing, Germany, AIAA-2006-0395 44th AIAA Aerospace Sciences Meeting and Exhibit and http://wwweng.uwyo.edu/mechanical/fa...-2009-1221-908 Caution - CFD analysis of wind turbine is a tough nut to crack according to my experience. Raashid |
||
![]() |
![]() |
![]() |
![]() |
#3 |
New Member
Ahmad Zein
Join Date: Feb 2011
Posts: 4
Rep Power: 16 ![]() |
Hello Raashid
I appreciate your help a lot but my aim is to find a tutorial that guide me throught my analysis on ANSYS Thanks you |
|
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Why my simulation not agree with the wind tunnel experiment | zhaowei | CFX | 4 | July 11, 2015 03:36 |
Solar Radiation in OpenFOAM | plainstyle | OpenFOAM Running, Solving & CFD | 15 | July 8, 2014 04:43 |
Simulation of a complex wing in solidworks flow simulation | niels1900 | FloEFD, FloWorks & FloTHERM | 6 | April 20, 2011 10:44 |
Continuous vs interrupted simulation | sega | OpenFOAM Running, Solving & CFD | 4 | November 3, 2008 14:29 |
strange simulation error | Ralf Schmidt | FLUENT | 2 | May 4, 2007 13:02 |