CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

Deriving Results from Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 5, 2011, 10:08
Default Deriving Results from Fluent
  #1
New Member
 
Alex
Join Date: Dec 2010
Posts: 9
Rep Power: 15
coondason is on a distinguished road
Hello

I've done everything.
-Created the Geometry.
-Meshed the Geometry.
-Waited a couple of hours for a convergence.

How do i get results??

Now i'll be serious.
I'm examining a 3D flow over a body.
After the calculations i need the following Data:
- Resultant Down-force.
- Resultant Drag.
- Center of Pressure.
- Plots of Pressure/Velocity Distribution along the Upper and Lower curves of the body. (As in airfoil analysis).

How do i do it?
** if needed, i can send a result file.**

I've read a lot of tutorials, and i've been working on this project for a very very long time, I'm desperate for some help.

Thank you very much for your help.
coondason is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Feeding Fluent results into another Fluent simulation fruk FLUENT 2 April 28, 2011 10:05
few quesions on ANSYS ICEMCFD and FLUENT Prakash.Paudel ANSYS 0 August 12, 2010 13:07
Exporting temperature results fro fluent to Ansys vinay kulkarni FLUENT 1 February 21, 2007 04:31
Fluent results: stagnation pressure greater .... Amit Shrestha FLUENT 5 December 8, 2005 09:01
Poor Results with RSM in Fluent boris FLUENT 0 October 31, 2005 19:01


All times are GMT -4. The time now is 04:35.