CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

Ansys Helping about Element solid non linier to get Web crippling

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 18, 2011, 02:33
Default Ansys Helping about Element solid non linier to get Web crippling
  #1
New Member
 
Johannes King Sianturi
Join Date: May 2011
Posts: 2
Rep Power: 0
Johannes King is on a distinguished road
I'm beginner in ANSYS v12. But I need solver about IWF Beam which the Beam get concentrated load on the "bearing plate".
I am draw the IWF beam in ANSYS use Solid Material with "Tet 10 node 187". And in material models, I use struktural linier Isotropic with Ex = 75e3 and PRXY = 0.3, with nonlinier elastic use multilinier elastic diagram.
And I use nonlinier solver about "Sol'n Control Solution". But after all when i use current LS, there ara problem like " (!) TB,MELA Plasticity option is not currently supported by Element type 187 (Element 1 and material 1)". And I hope you can give me the best solver about the element, and other problem solfer for it. Thank you..
Johannes King is offline   Reply With Quote

Old   May 18, 2011, 02:39
Default Ansys with IWF Beam And concentrated load on bearing plate to get web crippling
  #2
New Member
 
Johannes King Sianturi
Join Date: May 2011
Posts: 2
Rep Power: 0
Johannes King is on a distinguished road
I'm beginner in ANSYS v12. But I need solver about IWF Beam which the Beam get concentrated load on the "bearing plate". i am draw the IWF beam in ANSYS use Solid Material with "Tet 10 node 187". And in material models, I use struktural linier Isotropic with Ex = 75e3 and PRXY = 0.3, with nonlinier elastic use multilinier elastic diagram.
And I use nonlinier solver about "Sol'n Control Solution". But after all when i use current LS, there ara problem like " (!) TB,MELA Plasticity option is not currently supported by Element type 187 (Element 1 and material 1)". And I hope you can give me the best solver about the element, and other problem solfer for it. Thank you..
Johannes King is offline   Reply With Quote

Reply

Tags
ansys 12, ansys design modler

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mesh file for flow over a circular cylinder Ardalan Main CFD Forum 7 December 15, 2020 14:06
Any good forum for ANSYS Finite element analysis saisanthoshm88 Main CFD Forum 0 December 31, 2010 07:04
Ansys For Finite Element Analysis John Haynes Main CFD Forum 0 February 20, 2009 06:58
gas solid fluidized bed with ansys cfx mohamad CFX 0 November 21, 2007 18:55
CFX4.3 -build analysis form Chie Min CFX 5 July 13, 2001 00:19


All times are GMT -4. The time now is 02:26.