Multidody Mesh

fher1608 · June 21, 2011, 12:00

Hi, I'm trying to study the aerodynamics of a wing, and for that I have created a mesh made of 4 zones (this is because I want a very precise control of the mesh). Once the mesh is done and with high quality I entered it in fluent.
The problem is that once in, the contact walls between the 4 bodies are recognized as walls and not as fluid. I don't know how to change this and I need some help. Any idea?? Thank you very much

William D Acosta · June 22, 2011, 12:13

http://www.cfd-online.com/Forums/ans...ng-fluent.html

http://www.cfd-online.com/Forums/ans...-ansys-dm.html

hope that helps...

fher1608 · June 29, 2011, 13:33

The thing is that I'm using a sweep method mesh, and before doing that there were 4 sewpable bodies, and after doing that just one.

William D Acosta · June 29, 2011, 13:50

ok, if you have only 4 bodies and is not an annoyance to connect the faces manually, you can connect adjacent faces using a mesh interface instead of a multibody part.

See "Using non-conformal mesh" tutorial (Fluent help) for more info

fher1608 · July 2, 2011, 06:23

I tried creating a part from the 4 volumes and also I named the hole stuff. The thing is that, before doing this, there were 4 sweepable volumes, and before doing it there was only one, so I couldn't mesh the geometry as I wanted. How can I avoid this from happening?

June 21, 2011, 12:00	Multidody Mesh	#1
fher1608 New Member Fernando Join Date: Jun 2011 Posts: 6 Rep Power: 15	Hi, I'm trying to study the aerodynamics of a wing, and for that I have created a mesh made of 4 zones (this is because I want a very precise control of the mesh). Once the mesh is done and with high quality I entered it in fluent. The problem is that once in, the contact walls between the 4 bodies are recognized as walls and not as fluid. I don't know how to change this and I need some help. Any idea?? Thank you very much

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] surface mesh merging problem	everest	ANSYS Meshing & Geometry	44	April 14, 2016 07:41
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 22:11
Meshing aifoil in ICEM	student123a	ANSYS Meshing & Geometry	13	December 8, 2010 11:40
mesh missing after export in gambit	morteza08	ANSYS Meshing & Geometry	1	July 26, 2010 02:10
2d irregular grid	Remy	Main CFD Forum	1	December 22, 2008 05:49

June 22, 2011, 12:13		#2
William D Acosta New Member Join Date: May 2011 Posts: 9 Rep Power: 15	http://www.cfd-online.com/Forums/ans...ng-fluent.html http://www.cfd-online.com/Forums/ans...-ansys-dm.html hope that helps...

June 29, 2011, 13:33		#3
fher1608 New Member Fernando Join Date: Jun 2011 Posts: 6 Rep Power: 15	The thing is that I'm using a sweep method mesh, and before doing that there were 4 sewpable bodies, and after doing that just one.

June 29, 2011, 13:50		#4
William D Acosta New Member Join Date: May 2011 Posts: 9 Rep Power: 15	ok, if you have only 4 bodies and is not an annoyance to connect the faces manually, you can connect adjacent faces using a mesh interface instead of a multibody part. See "Using non-conformal mesh" tutorial (Fluent help) for more info

July 2, 2011, 06:23		#5
fher1608 New Member Fernando Join Date: Jun 2011 Posts: 6 Rep Power: 15	I tried creating a part from the 4 volumes and also I named the hole stuff. The thing is that, before doing this, there were 4 sweepable volumes, and before doing it there was only one, so I couldn't mesh the geometry as I wanted. How can I avoid this from happening?