Drag coefficient

amine3002 · June 23, 2011, 07:45

I want to determinate the drag coefficient of a submarine with AnsysV12
Is it possible?

mashinsazi · June 23, 2011, 11:57

I use Fluent which is a part of AnsysV13.You can use this software.It's placed in CFD part of Ansys.I think AnsysV12 had the same part.

amine3002 · June 27, 2011, 06:53

Do you have a tutorial that i can do it in this domain (damping coefficient and hydrodinamic analysis)
Thanks a lot

Centurion2011 · July 4, 2011, 04:36

Drag coeff (and lift coeff.) can be easily determined in Fluent. However, reference values must be specified (Area of surface, length, depth, velocity, etd.). Under Reports/Force there are obtained values of coefficients and pressure and shear forces (since drag actually consists of pressure drag and shear drag). See Andersons's Aerodynamics for best theory preview).

here are the best tutorials on Fluent (and other modules in Ansys):

http://avaxhome.ws/software/software..._training.html

good luck

amine3002 · July 5, 2011, 06:16

Thanks a lot, this link is very important

))

Centurion2011 · July 7, 2011, 08:13

then give me LIKE

June 23, 2011, 07:45	Drag coefficient	#1
amine3002 New Member Amine Fakhfekh Join Date: Jun 2011 Posts: 13 Rep Power: 15	I want to determinate the drag coefficient of a submarine with AnsysV12 Is it possible?

July 4, 2011, 04:36	Drag	#4
Centurion2011 Member Join Date: Jul 2011 Posts: 78 Blog Entries: 1 Rep Power: 19	Drag coeff (and lift coeff.) can be easily determined in Fluent. However, reference values must be specified (Area of surface, length, depth, velocity, etd.). Under Reports/Force there are obtained values of coefficients and pressure and shear forces (since drag actually consists of pressure drag and shear drag). See Andersons's Aerodynamics for best theory preview). here are the best tutorials on Fluent (and other modules in Ansys): http://avaxhome.ws/software/software..._training.html good luck

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drag Coefficient Convergence Problem	John	FLUENT	18	June 24, 2023 10:22
drag coefficient in ansys fluent 12.0	krishna	FLUENT	19	April 12, 2018 01:49
Incorrect Drag and Drag Coefficient for flow over a cylinder	ozzythewise	Main CFD Forum	8	June 13, 2012 07:24
Drag coefficient for parcels in dieselFoam	sebastian_vogl	OpenFOAM Running, Solving & CFD	5	December 31, 2008 13:19
Automotive test case	vinz	OpenFOAM Running, Solving & CFD	98	October 27, 2008 09:43

June 23, 2011, 11:57		#2
mashinsazi New Member kamran Join Date: Apr 2011 Posts: 17 Rep Power: 15	I use Fluent which is a part of AnsysV13.You can use this software.It's placed in CFD part of Ansys.I think AnsysV12 had the same part.

June 27, 2011, 06:53		#3
amine3002 New Member Amine Fakhfekh Join Date: Jun 2011 Posts: 13 Rep Power: 15	Do you have a tutorial that i can do it in this domain (damping coefficient and hydrodinamic analysis) Thanks a lot

July 5, 2011, 06:16		#5
amine3002 New Member Amine Fakhfekh Join Date: Jun 2011 Posts: 13 Rep Power: 15	Thanks a lot, this link is very important ))

July 7, 2011, 08:13		#6
Centurion2011 Member Join Date: Jul 2011 Posts: 78 Blog Entries: 1 Rep Power: 19	then give me LIKE