How to draw two airfoil in same plane?

darpan · August 23, 2011, 09:04

Hello everyone I need help....
I am using Ansys12.0 and i want to import or darw two similar naca0012 airfoil in one plane with 5m distance but I don't know how to do that....I have created one airfoil in a plane but dont know how to import second airfoil at some distance.......Basically I want to workout the turbulence effect of one airfoil to another airfoil.....at different distance......Please let me know how to do this......it will be very helpful

Josh · September 5, 2011, 14:10

You could try using two different geometry files: one with the airfoil at x = 0, and one with the airfoil at x = 5 m (i.e., put the data in a spreadsheet and add "5" to all of the x values to create a new airfoil). Then import each file separately.

August 23, 2011, 09:04	How to draw two airfoil in same plane?	#1
darpan New Member Darpan Chavda Join Date: Aug 2011 Posts: 1 Rep Power: 0	Hello everyone I need help.... I am using Ansys12.0 and i want to import or darw two similar naca0012 airfoil in one plane with 5m distance but I don't know how to do that....I have created one airfoil in a plane but dont know how to import second airfoil at some distance.......Basically I want to workout the turbulence effect of one airfoil to another airfoil.....at different distance......Please let me know how to do this......it will be very helpful

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Gmsh] Problem with Gmsh	nishant_hull	OpenFOAM Meshing & Mesh Conversion	23	August 5, 2015 02:09
[Gmsh] boundaries with gmshToFoam‏	ouafa	OpenFOAM Meshing & Mesh Conversion	7	May 21, 2010 12:43
Poor Residuals at Intersection Between Symmetry Plane and Airfoil Leading Edge	TWaung	CFX	2	February 16, 2010 08:11
how to draw camber line of an airfoil in Gambit	Muhammad Usman Qureshi	FLUENT	1	September 15, 2009 19:40
Q: how to draw pressure distribution on an airfoil	mario	FLUENT	0	February 9, 2007 21:45

September 5, 2011, 14:10		#2
Josh Senior Member Joshua Counsil Join Date: Jul 2009 Location: Halifax, Nova Scotia, Canada Posts: 366 Rep Power: 17	You could try using two different geometry files: one with the airfoil at x = 0, and one with the airfoil at x = 5 m (i.e., put the data in a spreadsheet and add "5" to all of the x values to create a new airfoil). Then import each file separately.