Problem with Volumes Gambit

Danath · October 19, 2011, 07:58

Hello !

i have creates two volumes(create real brick).These volumes are side by side (the side of a volume is glued to the side of the other volume)

when i try to merge the volumes i see a message that says that "Error: Volume volume.X can not be merged with other volume(s) (it is disconnected)"
When i try to create the volumes with edges everything is ok!(because i take the face of the first volume as the face of the other)

can i connect the volumes without change the drawing ?

-mAx- · October 19, 2011, 08:20

you have 2 common faces superposed.
Then connect the 2 surfaces, it won't merge your 2 volumes.
But after connecting you will be able to merge the volumes.

PS: There is a subforum dedicated to Ansys Mesh:
http://www.cfd-online.com/Forums/ansys-meshing/
You will have more chance to get a quick reply

October 19, 2011, 07:58	Problem with Volumes Gambit	#1
Danath Member Evangelos Join Date: Sep 2011 Posts: 87 Rep Power: 14	Hello ! i have creates two volumes(create real brick).These volumes are side by side (the side of a volume is glued to the side of the other volume) when i try to merge the volumes i see a message that says that "Error: Volume volume.X can not be merged with other volume(s) (it is disconnected)" When i try to create the volumes with edges everything is ok!(because i take the face of the first volume as the face of the other) can i connect the volumes without change the drawing ?

October 19, 2011, 08:20		#2
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	you have 2 common faces superposed. Then connect the 2 surfaces, it won't merge your 2 volumes. But after connecting you will be able to merge the volumes. PS: There is a subforum dedicated to Ansys Mesh: http://www.cfd-online.com/Forums/ansys-meshing/ You will have more chance to get a quick reply Mar777 likes this. __________________ In memory of my friend Hervé: CFD engineer & freerider

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem importing mesh into gambit	tsm554	FLUENT	7	December 3, 2010 22:15
Problem importing solidworks to gambit	holyo	ANSYS Meshing & Geometry	3	April 16, 2010 05:16
Problem with Gambit	Diego	FLUENT	0	July 5, 2007 03:30
Startup Problem in Gambit 2.2 with WindowXP	Win Win Maw	FLUENT	3	January 25, 2006 11:09
problem in CFX solver about isolated volumes	Yuan	CFX	2	August 16, 2004 22:54