* Help in Ansys Mesh *

anna · January 3, 2012, 14:54

Hello ,
could anyone please kindly help me in generating a 3-d mesh between two surfaces in ANSYS-ICEM 13.
I have two surfaces and the mesh for the calculation lies between these two surfaces, how to generate that mesh?
Thanks in advance.

PSYMN · January 3, 2012, 16:04

Please try a tutorial or two...

anna · January 3, 2012, 16:10

which tutorials you recommend me?
i did some but i think no focus on that kind of application.

PSYMN · January 3, 2012, 16:13

What kind of volume mesh are you looking for? Tetra/Prism? Hexa?

Meshing between two sheets is simpler than any of the tutorials. Doing pretty much any of them should give you the steps you need for the meshing part.

I guess all you will need to do on top of that is figure out how to create surfaces from the edges of the surfaces to close the gap between them and create a single volume.

There isn't some special button to mesh the volume between two surfaces. It is just meshing a volume and you need to create it if you only have two surfaces.

sheikh nasir · February 2, 2012, 22:13

hello
can any one help me in sliding mesh technique 2D analysis for train passing through tunnel. my email is
sheikhnasir39@gmail.com

January 3, 2012, 14:54	* Help in Ansys Mesh *	#1
anna New Member anaa Join Date: Mar 2009 Posts: 2 Rep Power: 0	Hello , could anyone please kindly help me in generating a 3-d mesh between two surfaces in ANSYS-ICEM 13. I have two surfaces and the mesh for the calculation lies between these two surfaces, how to generate that mesh? Thanks in advance.

January 3, 2012, 16:04		#2
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	Please try a tutorial or two... __________________ ----------------------------------------- Please help guide development at ANSYS by filling in these surveys Public ANSYS ICEM CFD Users Survey This second one is more general (Gambit, TGrid and ANSYS Meshing users welcome)... CFD Online Users Survey

January 3, 2012, 16:13		#4
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	What kind of volume mesh are you looking for? Tetra/Prism? Hexa? Meshing between two sheets is simpler than any of the tutorials. Doing pretty much any of them should give you the steps you need for the meshing part. I guess all you will need to do on top of that is figure out how to create surfaces from the edges of the surfaces to close the gap between them and create a single volume. There isn't some special button to mesh the volume between two surfaces. It is just meshing a volume and you need to create it if you only have two surfaces. __________________ ----------------------------------------- Please help guide development at ANSYS by filling in these surveys Public ANSYS ICEM CFD Users Survey This second one is more general (Gambit, TGrid and ANSYS Meshing users welcome)... CFD Online Users Survey

February 2, 2012, 22:13	help in sliding mesh for train in tunnel	#5
sheikh nasir Member Join Date: Jan 2012 Posts: 58 Rep Power: 14	hello can any one help me in sliding mesh technique 2D analysis for train passing through tunnel. my email is sheikhnasir39@gmail.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] SnappyHexMesh for internal Flow	vishwa	OpenFOAM Meshing & Mesh Conversion	24	June 27, 2016 08:54
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 06:20
[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM	kawamatt2	ANSYS Meshing & Geometry	17	December 20, 2011 11:45
Convergence moving mesh	lr103476	OpenFOAM Running, Solving & CFD	30	November 19, 2007 14:09
Problem importing GAMBIT mesh to Ansys geometry	David G.	CFX	0	June 19, 2005 06:01

January 3, 2012, 16:10		#3
anna New Member anaa Join Date: Mar 2009 Posts: 2 Rep Power: 0	which tutorials you recommend me? i did some but i think no focus on that kind of application.

*** Help in Ansys Mesh ***

* Help in Ansys Mesh *