help need for my project: design n simulation of ic engine

sid87 · February 9, 2012, 20:05

hi all,

i m student of BE mech. engg. i m working on project of design n simulation of ic engine. can any 1 recommend me which s/w will be best to work on????
i would be thankful if any can briefly help me in approaching this project...

thank you

with regards
sid

tsram90 · February 10, 2012, 09:01

One of the most simple and most used ones is Fluent and Gambit or the latest version called Ansys workbench.

make sure what you are analyzing.. Like combustion pattern, Formation of soot/Nox, Effect of different fuels, effect of diff injection/spark timings etc.

sid87 · February 10, 2012, 11:49

thank you very much for the info... is it possible to work only on ANSYS 13???

tsram90 · February 10, 2012, 12:01

Quote:

Originally Posted by sid87

thank you very much for the info... is it possible to work only on ANSYS 13???

in my personal experience I had trouble running Ansys 13.. And Ansys 13 miss Gambit. If you are starting fresh it might not be a problem

sid87 · February 27, 2012, 08:21

if i m using ansys 14 how do i start ????

sheth · February 27, 2012, 22:03

As you said you're working on BE project, I assume that you have very limited time to complete.

IC engine simulation is not just one small things actually many small analysis are involved, and learning each of them in short time might be difficult.

It can mainly be classified in structural and fluid analysis, and there is FSI (fluid structure interaction), in FSI you study effect of fluid on structure or vice-versa.

If you're from mechanical stream you should opt some structural analysis and if you would like to do fluid analysis (using CFD), learn from some research papers/project first and then use CFX or Fluent tutorials. Although cfx doesn't have particular ic engine tutorial, it has some other relevant tutorials.

February 9, 2012, 20:05	help need for my project: design n simulation of ic engine	#1
sid87 New Member sid Join Date: Feb 2012 Posts: 5 Rep Power: 14	hi all, i m student of BE mech. engg. i m working on project of design n simulation of ic engine. can any 1 recommend me which s/w will be best to work on???? i would be thankful if any can briefly help me in approaching this project... thank you with regards sid

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Composite Engine Valve Project	cortez505	FLUENT	1	November 18, 2009 04:02
IC Engine Flow simulation	Apurv	Main CFD Forum	2	February 8, 2000 00:12
Info: Short Course On Thermal Design of Electronic Equipment	Arnold Free	Main CFD Forum	0	August 10, 1999 10:18
Engine simulation (seeking help with method to use)	Geoff Rathbun	Main CFD Forum	4	April 13, 1999 14:19
Question concerning about the flow simulation of a fan in an engine room.	ghlee	Main CFD Forum	3	October 21, 1998 07:05

February 10, 2012, 09:01		#2
tsram90 Member Join Date: Oct 2011 Posts: 80 Rep Power: 14	One of the most simple and most used ones is Fluent and Gambit or the latest version called Ansys workbench. make sure what you are analyzing.. Like combustion pattern, Formation of soot/Nox, Effect of different fuels, effect of diff injection/spark timings etc.

February 10, 2012, 11:49		#3
sid87 New Member sid Join Date: Feb 2012 Posts: 5 Rep Power: 14	thank you very much for the info... is it possible to work only on ANSYS 13???

February 27, 2012, 08:21		#5
sid87 New Member sid Join Date: Feb 2012 Posts: 5 Rep Power: 14	if i m using ansys 14 how do i start ????

February 27, 2012, 22:03		#6
sheth Member sheth roh Join Date: Jul 2011 Posts: 56 Rep Power: 14	As you said you're working on BE project, I assume that you have very limited time to complete. IC engine simulation is not just one small things actually many small analysis are involved, and learning each of them in short time might be difficult. It can mainly be classified in structural and fluid analysis, and there is FSI (fluid structure interaction), in FSI you study effect of fluid on structure or vice-versa. If you're from mechanical stream you should opt some structural analysis and if you would like to do fluid analysis (using CFD), learn from some research papers/project first and then use CFX or Fluent tutorials. Although cfx doesn't have particular ic engine tutorial, it has some other relevant tutorials.