|
[Sponsors] |
while reading mesh and converting to polyhedra... |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 10, 2012, 15:51 |
while reading mesh and converting to polyhedra...
|
#1 |
Senior Member
Emre G
Join Date: May 2011
Location: Turkey
Posts: 126
Rep Power: 15 |
Hi,
i am getting that message while reading mesh or converting current mesh to polyhedra.. MPI Application rank 1 exited before MPI_Finalize() with status -1073741819 999999 (..\src\mpsystem.c@1149): mpt_read: failed: errno = 10054 999999: mpt_read: error: read failed trying to read 4 bytes: Invalid argument The Parallel FLUENT process could not be started. why does it occur? thanks, emre |
|
February 10, 2012, 18:18 |
|
#2 |
Senior Member
Emre G
Join Date: May 2011
Location: Turkey
Posts: 126
Rep Power: 15 |
solved !
was a RAM problem.... Last edited by emreg; February 18, 2012 at 16:18. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Polyhedra and sliding mesh? | rockewan | FLUENT | 5 | December 1, 2018 20:07 |
[Commercial meshers] Problem converting fluent mesh | vinz | OpenFOAM Meshing & Mesh Conversion | 28 | October 12, 2015 07:37 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 04:52 |
Converting Starccm+ mesh | Ladnam | OpenFOAM | 0 | September 14, 2011 07:30 |
[Commercial meshers] Converting a mesh with splitted cells using fluentMeshToFoam | jlpelerin | OpenFOAM Meshing & Mesh Conversion | 4 | April 25, 2011 17:56 |