CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Autodesk Simulation CFD (https://www.cfd-online.com/Forums/autodesk-simulation-cfd/)
-   -   Combined linear-angular motion (flow driven) (https://www.cfd-online.com/Forums/autodesk-simulation-cfd/214467-combined-linear-angular-motion-flow-driven.html)

nskelly February 1, 2019 05:38

Combined linear-angular motion (flow driven)
 
Hi

I am working on project where a bileaflet valve is moving linearly up and down and should open to a certain angle. When it moves down the pressure should close the valve.

I am having trouble getting the valves to open using flow driven motion. The valves open at random times and either one is open and the other is not. This results in unphysical pressures for the device.

I have attached a image of the problem.

I am using pressure BCs at inlet and outlet, k-epsilon model, intelligent solution.

Any advice would help.


All times are GMT -4. The time now is 08:01.