 |
 |
 |
|
|
|
[Sponsors] | ||||
July 2, 2024, 02:26
|
Custom motion of solid bodies
|
#1 |
|
New Member
Andrew
Join Date: Nov 2010
Posts: 12
Rep Power: 16  |
Has anyone successfully implemented this solution for custom motion:
https://www.autodesk.com/support/tec...odesk-CFD.html I'm trying to simulate solid bodies moving through an elliptical path while they rotate. With this method is it possible to define custom motion for more than one body? If so, how? |
|
|
|
|
|
January 10, 2025, 03:41
|
|
#2 |
|
New Member
Laverne
Join Date: Nov 2024
Posts: 1
Rep Power: 0 |
Yes, this solution should allow custom motion for multiple bodies. You can define separate motion profiles for each body by creating individual boundary conditions for each one in the setup.
__________________
Last edited by Johnnirrell; February 7, 2025 at 23:56. |
|
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Reading rigidBody motion state from custom library | katiuskas | OpenFOAM Programming & Development | 2 | November 21, 2023 05:49 |
| Modelling solid particles motion inside a rotating drum with lifters | mmeng | Main CFD Forum | 3 | May 6, 2021 17:02 |
| [DesignModeler] Surface bodies to solid body. | KLA | ANSYS Meshing & Geometry | 4 | March 10, 2020 04:59 |
| Solid motion and boundary conditions | JohnPuentes | CFX | 3 | September 7, 2019 23:39 |
| How to subtract a part with solid & surface bodies from an enclosure? | woodmark75 | FLUENT | 1 | November 2, 2014 16:57 |
Linear Mode
