unable to change ssf

hansai · February 22, 2013, 05:06

hi all!
another wired problem - probably with an easy solution:
after importing a mesh, saving and creating a new case, I cannot change any settings of the solver steering file. has anybody made any experiences?

Ayoshi · February 22, 2013, 14:16

hey hansai ,

there are 2 situations where it can happen
a) u wont have clicked case file on the project tree and checked. try clicking the case on project tree and try.
b) the case is running .

other than above 2 it cannot happen according to my knowledge . if u find something else , just update.

amin_u50 · February 23, 2013, 04:21

yes.If you click on the Solver Steering File .solve your problem...and continue
and enjoy it...

chang.gaikwad · February 24, 2013, 00:20

it definitely happens in above two situations however I have experienced it other situations also. In that case I right click on 'ssf' and select 'edit ssf' or close the project and reopen it.

Nothing is more mysterious than FIRE

Ayoshi · February 24, 2013, 03:10

Quote:

Originally Posted by chang.gaikwad

it definitely happens in above two situations however I have experienced it other situations also. In that case I right click on 'ssf' and select 'edit ssf' or close the project and reopen it.

Nothing is more mysterious than FIRE

hello mr gaikwad,

can u help me in knowing what all the other situations ???

hansai · February 24, 2013, 14:43

thanks to all for the help!

i have already tried all the possibilities (right click+edit ssf, edit ssf at the option bar on the right side, closing project and reopening, double click...) and i had activated the case.
i failed via remote desktop as well as directly entering on the workstation.
the case isnt running as well, since i havent started the simulation yet.

i think it could be a problem with the licence, but does anybody know, how to find out? there were no error messages in the command window...

chang.gaikwad · February 26, 2013, 01:42

Quote:

Originally Posted by Ayoshi

hello mr gaikwad,

can u help me in knowing what all the other situations ???

1. If you have case running on your machine and you switched of the machine by mistake: When FIRE start running the case it creates .<CaseName>.dat.lock, .<CaseName>.flb.lock and .isrunning files. These files locks ssf and we can not modify it. So if you have switched off the machine without clean clouser of the running case then above files remain in the case folder and keeps ssf file locked when you switch of the machine next time. You have to delete these files manually to unlock it.

2. Sometimes when you open the project in different software version than the one it was created originally you may find ssf uneditable. Reopening the project will resolve the issue.

I hope this helps. Let me know if you have specific issue.

chang.gaikwad · February 26, 2013, 01:44

See my post below if that can resolve your issue. If not I can suggest another workaround.

hansai · February 26, 2013, 06:50

finally i found the solution:

i used to open fire in the command-window with the "cfdwm -v=v2011" command. fire started normally, but in the command window stood: "the cfdwm command is deprecated. please use fire_wm". so i used "fire_wm -v=v2011". but from that moment on, i couldn´t any longer edit the ssf. the "fire_wm" command also affected other functions like zooming and editing values (with . or ,)!
...just in case, that anyone has got the same problem...

February 22, 2013, 05:06	unable to change ssf	#1
hansai New Member Join Date: Oct 2012 Posts: 11 Rep Power: 13	hi all! another wired problem - probably with an easy solution: after importing a mesh, saving and creating a new case, I cannot change any settings of the solver steering file. has anybody made any experiences?

February 23, 2013, 04:21	hi hanasi	#3
amin_u50 Senior Member amin u3fi Join Date: Feb 2013 Posts: 137 Rep Power: 13	yes.If you click on the Solver Steering File .solve your problem...and continue and enjoy it...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Thermal phase change model	Piti	CFX	1	January 14, 2021 10:03
How to change molecular weight of a species in pdf-mixture	Jenny_W	FLUENT	0	November 3, 2012 16:49
Sun Grid Engine	grtabor	OpenFOAM Running, Solving & CFD	28	August 22, 2012 09:27
openfoam 1.6 on debian etch	romant	OpenFOAM Installation	9	May 6, 2010 02:26
[Commercial meshers] ST_Malloc: out of memory.malloc_storage: unable to malloc Velocity SA,	cfdproject	OpenFOAM Meshing & Mesh Conversion	0	April 14, 2009 15:45

February 22, 2013, 14:16		#2
Ayoshi New Member Join Date: Jun 2012 Posts: 6 Rep Power: 13	hey hansai , there are 2 situations where it can happen a) u wont have clicked case file on the project tree and checked. try clicking the case on project tree and try. b) the case is running . other than above 2 it cannot happen according to my knowledge . if u find something else , just update.

February 24, 2013, 00:20		#4
chang.gaikwad New Member Changdeo Gaikwad Join Date: Jan 2013 Location: Pune, India Posts: 13 Rep Power: 13	it definitely happens in above two situations however I have experienced it other situations also. In that case I right click on 'ssf' and select 'edit ssf' or close the project and reopen it. Nothing is more mysterious than FIRE

February 24, 2013, 14:43		#6
hansai New Member Join Date: Oct 2012 Posts: 11 Rep Power: 13	thanks to all for the help! i have already tried all the possibilities (right click+edit ssf, edit ssf at the option bar on the right side, closing project and reopening, double click...) and i had activated the case. i failed via remote desktop as well as directly entering on the workstation. the case isnt running as well, since i havent started the simulation yet. i think it could be a problem with the licence, but does anybody know, how to find out? there were no error messages in the command window...

February 26, 2013, 01:44		#8
chang.gaikwad New Member Changdeo Gaikwad Join Date: Jan 2013 Location: Pune, India Posts: 13 Rep Power: 13	See my post below if that can resolve your issue. If not I can suggest another workaround.

February 26, 2013, 06:50		#9
hansai New Member Join Date: Oct 2012 Posts: 11 Rep Power: 13	finally i found the solution: i used to open fire in the command-window with the "cfdwm -v=v2011" command. fire started normally, but in the command window stood: "the cfdwm command is deprecated. please use fire_wm". so i used "fire_wm -v=v2011". but from that moment on, i couldn´t any longer edit the ssf. the "fire_wm" command also affected other functions like zooming and editing values (with . or ,)! ...just in case, that anyone has got the same problem...