Fire wm
 

I am solving single cylinder four stroke, diesel engine with below mentioned conditions ,I generated the mesh file in ESE, and imported .fpr file in WM.All the boundary conditions are applied with the help of user manual. Soon I give it for calculation it starts and in very less time dialogue box appears saying calculation is finished.

Number of injection holes: 6

Bore X stroke: 13.719 X 16.51 cm

compression ratio :15.1

connecting rod :26.162


IVC: 573 THAT IS -147 ATDC

EVO :854

FUEL INJ./CYCLE :0.00016550

INJ DURATION :21.6 DEG

MAX NUMBER OF ITERATION/ CRANK ANGLE :20 DEG

MIN NUMBER OF ITERATION/ CRANK ANGLE :10 DEG

Thank u for ur help