[vlkncfd]

Dear all;

I am simulating a diesel combustion but after start of injection it was suddenly diverged. I attached .fla file belong to the simulation.

Thanks.

2 1.06E-01 6.29E-01 2.46E-01 2.15E+02 1.02E+00 8.01E+00 2.63E+00 3.58E+03 6.75E+02 1.78E+03-2.91E+06 1.80E+11 1.61E+20 1.13E+04
3 2.61E-01 3.52E+00 7.40E-02 1.65E+19 1.02E+00 4.48E+04 2.63E+00 -3.11E+24-7.66E+24 7.32E+24 1.30E+31 7.23E+38 5.03E+64 1.13E+04
Problem diverges with flb value: TE, location: 10, material: 1
Problem diverges with flb value: ED, location: 10, material: 1
%fire-I-CMAIN, CALCULATION DIVERGED.

[iman.pourmousavi]

Originally Posted by vlkncfd

Dear all;

I am simulating a diesel combustion but after start of injection it was suddenly diverged. I attached .fla file belong to the simulation.

Thanks.

2 1.06E-01 6.29E-01 2.46E-01 2.15E+02 1.02E+00 8.01E+00 2.63E+00 3.58E+03 6.75E+02 1.78E+03-2.91E+06 1.80E+11 1.61E+20 1.13E+04
3 2.61E-01 3.52E+00 7.40E-02 1.65E+19 1.02E+00 4.48E+04 2.63E+00 -3.11E+24-7.66E+24 7.32E+24 1.30E+31 7.23E+38 5.03E+64 1.13E+04
Problem diverges with flb value: TE, location: 10, material: 1
Problem diverges with flb value: ED, location: 10, material: 1
%fire-I-CMAIN, CALCULATION DIVERGED.

Hello
did you fix it?
I look forward to your reply.
Iman