|
[Sponsors] |
Divergence of Boiling Temperature in a Cooling Jacket |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 25, 2018, 05:02 |
Divergence of Boiling Temperature in a Cooling Jacket
|
#1 |
New Member
Philip
Join Date: Oct 2018
Posts: 2
Rep Power: 0 |
Hi guys,
i need to simulate a cooling jacket and i want to implicate the roughness of the tubes and the boiling phenomenon. The problem is that the boiling temperature diverged and in don't know the reason. It is a steady mode simulation and the initialization mode is set to "uniform initialization". I applied the "Single Phase Boiling" only to the head and the model activates at the 400 iteration so the pressure is established. The other settings I took from the Solution type "Cooling Jacket". Does anyone know the problem here ? kind regards |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need help - Divergence in AMG solver - temperature | nareshzeeda1994 | FLUENT | 5 | March 29, 2018 10:27 |
Two Phase Flow In Vertical Pipe | stonepreston | FLUENT | 2 | October 31, 2017 09:35 |
How can I avoid Divergence when simulating a boiling flux in FLUENT | P_VS | Fluent Multiphase | 0 | July 14, 2016 09:59 |
Divergence in AMG solver: Temperature | Alex07 | FLUENT | 0 | June 17, 2015 16:03 |
Divergence detected in AMG solver: temperature | Alex07 | FLUENT | 0 | June 2, 2015 17:44 |