-
TUI commands for running a Transient simulation in ANSYS FLUENT
Quote:Thanks for this post. It really helps me while scripting for transient simulation. But when I try to run a simulation in supercomputer it really took a longer time than usual with 64ncpus. Is there any solution for that?
I don't even understand why it took such a long time in supercomputer.Posted February 7, 2022 at 03:52 by vivek123 -
How to slove "temperature limited to 1.0000e+00001 in cells.."
hi, i am facing this issue. my mesh min ortho qua is 0.2 and max skewness is 0.97. so i suspect its because of this.Posted November 26, 2019 at 11:12 by zaqureshi -
TUI commands for running a Transient simulation in ANSYS FLUENT
Thanks for this post. It really helps me while scripting for transient simulation. But when I try to run a simulation in supercomputer it really took a longer time than usual with 64ncpus. Is there any solution for that?
I don't even understand why it took such a long time in supercomputer.Posted November 2, 2019 at 05:03 by mohanty.shuvam4 -
TUI commands for running a Transient simulation in ANSYS FLUENT
@raunakjung
/file/auto-save/data-frequency 5Posted August 27, 2018 at 04:33 by szudi -
useful udf ! thanks to macfly
can you explain what is this
thanks a lotPosted January 25, 2018 at 03:44 by tufygo -
TUI commands for running a Transient simulation in ANSYS FLUENT
How to save following data for every step of every 5th-time step?
Thank youPosted June 7, 2017 at 19:47 by raunakjung -
TUI commands for running a Transient simulation in ANSYS FLUENT
Hello,
Does anyone know the TUI command to run a pseudo-transient simulation in ANSYS Fluent?Posted January 17, 2017 at 14:07 by Ekta J -
Enhanced Wall Treatment
Hello I am a beginner to CFD and currently a student. I was wondering where a good place to start to learn CFD is such as websites, books, and tutorials, so that i can learn to code for simple flows over an object.Posted November 30, 2016 at 22:12 by stefcfd -
Posted May 15, 2014 at 13:37 by Azy -
improving quality after merging tetra and prism
Thanks Ali for sharing the great threads by SimonPosted December 3, 2012 at 12:43 by Far -
2d meshing in ansys meshing
My two centsPosted November 22, 2012 at 06:39 by Far