CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums

Entries for April 2014

Register Blogs Members List Search Today's Posts Mark Forums Read

Old

Enhanced Wall Treatment

Posted April 11, 2014 at 17:53 by diamondx

Useful near wall treatments informations:
Quote:
Originally Posted by Far View Post
This is completely wrong

If this is true then they would have used the simple else-if command which was used in the previous version of SA and K-Omega model. Still you can observe in the theory guide of Fluent (I am talking about SA model) they are using the integration to wall approach for the Y+< 2 and wall function approach for the Y+>30 and strongly recommend to make the meshes either with Y+< 2 or Y+> 30 so that they
...
diamondx's Avatar
Super Moderator
Posted in Uncategorized
Views 2947 Comments 1 diamondx is offline Edit Tags
Old

y+ calculator for equilibrium flows

Posted April 10, 2014 at 04:58 by sbaffini (NuTBox)
Updated December 21, 2016 at 10:08 by sbaffini

y+ calculation is, possibly, the most pervasive topic among CFD practitioners and, certainly, anybody doing CFD for more than a month already has his own tool to compute it.

Still, all the y+ calculators i am aware of rely on a very specific flow condition, namely, a flat plate boundary layer. This is probably the most common practical case but not the only option. For example, the fully developed flow in a pipe is cretainly different and possibly requires a different input for the...
Attached Files
File Type: xlsx yplus.xlsx (12.6 KB, 533 views)
sbaffini's Avatar
Senior Member
Views 2545 Comments 2 sbaffini is offline Edit Tags
Old

Free Android App for Compressible Nozzle

Posted April 4, 2014 at 10:17 by nilyash81

https://play.google.com/store/apps/d...ozzleflowfinal

1. Compressible flow in Convergent Divergent Nozzle2. Get mode of operation under specified operating conditions- Whether nozzle is Subsonic Nozzle, Normal Shock exist in Nozzle, location of Shock, Under-expanded or Over-expanded Nozzle. Compute Thrust, Exit Velocity, Exit Temperature and Mass Flow rate.
3. Optimization of Nozzle - Optimize Nozzle keeping fixed Area ration or Pressure ratio. Find...
New Member
Posted in Uncategorized
Views 2058 Comments 0 nilyash81 is offline Edit Tags

All times are GMT -4. The time now is 06:18.