CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums

Entries for March 2021

Register Blogs Members List Search Today's Posts Mark Forums Read

Old

OpenFOAM tips and tricks

Posted March 16, 2021 at 01:44 by sphani4391

I am sharing a few tips and tricks for better OpenFOAM simulations. These are not any new tips I discovered. These are just some which I felt most useful based on my experience.

1. Mesh is the most important aspect - I have spent countless hours fixing issues in other places while the real issue was with my mesh. As a thumb rule, make sure the mesh has: no non-orthogonality issues, low aspect ratio cells, no refinement zones in the region with high gradients

2. Always start...
New Member
Posted in Uncategorized
Views 151 Comments 0 sphani4391 is offline Edit Tags
Old

Boundary conditions for multiphase flow

Posted March 16, 2021 at 01:21 by sphani4391

I have struggled a lot with boundary conditions for multiphase flow, particularly where the multiphase spray is impinging on the outlet patch (typically the case of an internal flow simulation of a fuel injector spray). I have finally settled on the following Boundary conditions which work!

Simulation details: I am doing a 2D axisymmetric flow simulation using a wedge BC at front/ back planes. I am using a custom solver based on homogeneous relaxation model. This is similar to cavitatingFoam...
New Member
Posted in Uncategorized
Views 87 Comments 1 sphani4391 is offline Edit Tags

All times are GMT -4. The time now is 06:38.