CFD Online Logo CFD Online URL
Home > Forums

mapFields taking too long

Register Blogs Members List Search Today's Posts Mark Forums Read

Rate this Entry

mapFields taking too long

Posted April 5, 2017 at 05:26 by kindle

very close to my problem on post-processing using mapFields

Originally Posted by Carlen View Post
Hi foamers,

I am facing a problem of mapFields taking too long to map fields from a fine mesh to a coarser mesh. I am running simulation using sprayFoam, and want to coarse the mesh to achieve faster solution. So I executed:

mpirun -n 4 mapFields ../aachenBomb-fine -sourceTime latestTime  -consistent -parallel
in the aacheBomb-coarse directory and it is running without errors. However, it gets stuck at here for four hours:
 Create meshes

Source mesh size: 42025    Target mesh size: 42025

Consistently creating and mapping fields for time 0.0004

Creating mesh-to-mesh addressing for region0 and region0 regions using cellVolumeWeight
    Overlap volume: 4e-05
Creating AMI between source patch walls and target patch walls using faceAreaWeightAMI
    AMI: Creating addressing and weights between 19762 source faces and 19762 target faces
    AMI: Patch source sum(weights) min/max/average = 1, 1, 1
    AMI: Patch target sum(weights) min/max/average = 1, 1, 1
    interpolating mut
    interpolating rho
    interpolating PaSR:kappa
    interpolating k
    interpolating H2O
    interpolating PaSR:dQ
    interpolating alphat
    interpolating N2
    interpolating O2
    interpolating dQ
    interpolating p
    interpolating T
    interpolating epsilon
    interpolating U

    processing cloud "sprayCloud"
Anybody knows what is wrong?

kind regards,

PS: I am using OF2.3.1
Posted in Post-processing
Views 436 Comments 0 Edit Tags Email Blog Entry
« Prev     Main     Next »
Total Comments 0



All times are GMT -4. The time now is 21:55.