CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums

Links and tutorials for OpenFOAM and dependencies

Register Blogs Members List Search Today's Posts Mark Forums Read

Links and tutorials for OpenFOAM and dependencies In this category I'll keep all of the stuff relevant to OpenFOAM and ThirdParty applications it depends on.
Old
Rating: 2 votes, 5.00 average.

Using the official pre-built ParaView 3.8.0 version with OpenFOAM...

Posted July 17, 2010 at 15:19 by wyldckat
Updated September 5, 2011 at 05:17 by wyldckat (Generalized instructions for any version of OpenFOAM; now with sed :D And some more adjustments and instructions)

<-- Related issues to ParaView with OpenFOAM - Fixes and solutions


NOTE - New instructions available here: Using the official pre-built ParaView 3.10.1 version with OpenFOAM
NOTE 2: Instructions for doing a custom build: Building ParaView 3.8.0 with custom Qt 4.6.3

_________________________________________________
Greetings to all!

[When this post was first written] Less than a month ago OpenFOAM 1.7.0 was released. With it also came ParaView...
Retired Super Moderator
Views 12436 Comments 16 wyldckat is offline Edit Tags
Old
Rating: 7 votes, 5.00 average.

List of threads useful for building OpenFOAM and other Third Party tools

Posted April 8, 2010 at 14:05 by wyldckat
Updated December 8, 2013 at 09:37 by wyldckat (Added a few more links...)

Well, I've been meaning to this for a while now, so here goes - This a list of threads that could prove useful to new comers to OpenFOAM on how to build it as well as the Third Party tools.

Keep in mind:
  • That this isn't going to answer all of the questions you might have, but should help you with the more usual issues you might have.
  • The solution you seek might only come along after reading most of the thread each link points to.

Due to blog post constraint to 10000...
Retired Super Moderator
Views 22175 Comments 2 wyldckat is offline Edit Tags

All times are GMT -4. The time now is 13:10.