Home > Forums > Software User Forums > Siemens

Deformable mesh or not,

Updated Threads

Reply

Search this Thread

January 15, 2013, 15:12	Deformable mesh or not,	#1
Troglo New Member Alessandro Antonini Join Date: Jan 2013 Posts: 1 Rep Power: 0	hi all, I am really new in the CFD, expecially with STAR CCM, so my question could be stupid but I could not get this information. I made a simulation of a floating body, with the model VOF WAVE, so my problem is: How can I know if the mesh that I am using is deformable during the motion of the floater? I use a continuum mesh>model>trimmer,surfer remesher and prism layer mesher, togheter with an anisotropic volume control around the free surface. Any help would be really appreciated

Reply

Tags

mesh deformation

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] Add Mesh Layers doesnt work on the whole surface	Kryo	OpenFOAM Meshing & Mesh Conversion	13	February 17, 2022 07:34
how to set periodic boundary conditions	Ganesh	FLUENT	15	November 18, 2020 06:09
[ICEM] surface mesh merging problem	everest	ANSYS Meshing & Geometry	44	April 14, 2016 06:41
Inner geometry gets lost exporting mesh from ICEM CFD to CFX-Pre	powpow	CFX	3	December 20, 2012 09:14
basic of mesh refinement	arya	CFX	4	June 19, 2007 12:21

All times are GMT -4. The time now is 00:42.