Star ccm+ model

klenn · January 27, 2014, 15:03

Hi, I am completly New to Star CCM+ and are making an airfoil simulation.
I have imported an airfoild and created an fluid domain around it as a Block. Then airfoil is subtracted from domain and domain Assigned to Region1. But there should be only 6 items in this region, the 6 faces of the Box. Now there is also items from the airfoil.
I think that can be the reason why i cant generate meshing.
Maybe it is possible to see from the Pictures what can be wrong. Thankyou in advance

Alfalfa · January 27, 2014, 20:37

How do you assign your part to the region? For this you first need to separate your part by surface (within the part), then you assign part to region (one region for all part, one boundary per part surface) and then you should be good to mesh. (You seem to have done the right thing).

The airfoils is supposed to be in the region part since it is a boundary, else you would only have a cube. That is not the source of the problem I think. Looking at the error, the problem seems to be the lack of memory, what are the specs of the computer you use?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to model MRF+VOF in star cd?	kaushik_patel	Siemens	0	April 18, 2012 02:45
Problem In Star CCM Plus	ramarya	STAR-CCM+	1	July 10, 2011 05:59
simulation created in star CCM 5.06	yin	STAR-CCM+	1	May 4, 2011 02:29
Equivalent of Gambit neutral file in star ccm	pradeap	STAR-CCM+	3	July 2, 2010 07:36
Star CCM - Problem with image hardcopy quality	James	Siemens	2	March 14, 2007 02:36

January 27, 2014, 20:37		#2
Alfalfa New Member Gabriel Boucher Join Date: Jul 2013 Posts: 23 Rep Power: 12	How do you assign your part to the region? For this you first need to separate your part by surface (within the part), then you assign part to region (one region for all part, one boundary per part surface) and then you should be good to mesh. (You seem to have done the right thing). The airfoils is supposed to be in the region part since it is a boundary, else you would only have a cube. That is not the source of the problem I think. Looking at the error, the problem seems to be the lack of memory, what are the specs of the computer you use?