|
[Sponsors] |
December 17, 2000, 12:47 |
divergency of combustion calcualtion
|
#1 |
Guest
Posts: n/a
|
The question is : when the simulation of combustion is calculated, because there are several outlets . convergence is very difficult.who can give me some hint.
|
|
December 20, 2000, 04:26 |
Re: divergency of combustion calcualtion
|
#2 |
Guest
Posts: n/a
|
Hong, We need more details to try to help you.
|
|
December 20, 2000, 05:52 |
Re: divergency of combustion calcualtion
|
#3 |
Guest
Posts: n/a
|
Thanks. The furnace has several outlet in difference position. The outlet mass flux can be know. The fuel is air. when the calculation is doing, the warning messages have two type as following: 1, *** WARNING #007 *** SETTING T AT CELL 18157 FROM -4.076E+00 TO 0.01*TREF FOR DENSITY CALCULATION
2. *** WARNING #066 *** TEMPERATURE LESS THAN MIN. RANGE TEMPERATURE AT 1 CELLS. MINIMUM TEMPERATURE OF -.120E+04 AT CELL 19262 what is best method to debug it. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
combustion model in premixed combustion chamber | wuyu | FLUENT | 9 | February 16, 2018 10:40 |
Hydrogen Air combustion in a combustion chamber | popi | CFX | 7 | July 11, 2007 18:40 |
Sawdust Combustion-Non-premixed Combustion Model | Jessy | FLUENT | 1 | June 19, 2007 10:59 |
UFD_variable gas properties calcualtion | sam | FLUENT | 0 | June 12, 2007 03:59 |
Residual divergency problem | Sajal Sengupta | Main CFD Forum | 0 | February 2, 2007 01:24 |