CFD Online Logo CFD Online URL
Home > Forums > CD-adapco

Altering Legend

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 4, 2001, 09:31
Default Altering Legend
Bo Jensen
Posts: n/a

Is there any one out there who knows how to change the position and direction of the legend in Star-CD

Can is be changed at all....


  Reply With Quote

Old   July 5, 2001, 16:12
Default Re: Altering Legend
Posts: n/a
It is somehow possible but requires a lot of manual work.
  Reply With Quote

Old   July 9, 2001, 03:07
Default Re: Altering Legend
Philip Jones
Posts: n/a
The legend is controlled by the PLDISPLAY command (pldi) and allows the scale to be moved and sized but not rotated, from the online help:

SCALE, SX(10.1), SY, WIDTH(0.5)

On post plots, the contour or vector scale, which can be moved to another location (along with the post HEADING and MINMAX information). The default for SY is directly underneath any other plot info that is to be displayed. WIDTH is the width of the scale boxes.

Note the triad and title can also be moved, and our logo (note the first arg to this undocumented command is the scale so pldi on logo 5 5 5 gives a big 'un)
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
2D Low Speed Airfoil Problem when altering Inlet mike wilson CFX 12 August 3, 2010 11:06
Altering properties of fluid within the domain Nikhil Dani FLUENT 3 December 12, 2008 05:26
Altering the mesh alejo OpenFOAM Pre-Processing 3 February 16, 2006 09:15
Help: Legend disppeared? CFX-Post 5.5.1 CFX 1 August 30, 2002 08:39
CFX Tascflow Legend Srinu CFX 0 July 23, 2002 01:19

All times are GMT -4. The time now is 06:23.