CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Help in Loading STARHPC on SGI Origin 2800

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 13, 2001, 02:48
Default Help in Loading STARHPC on SGI Origin 2800
  #1
anindya
Guest
 
Posts: n/a
I need help in loading the parallel (STARHPC) version of starCD on a SGI Origin 200 machine. I need help in setting up the environment using ProHpc.

Thanks

Anindya
  Reply With Quote

Old   December 13, 2001, 14:04
Default Re: Help in Loading STARHPC on SGI Origin 2800
  #2
Joern Beilke
Guest
 
Posts: n/a
Get the "mpi" and "array" software from the sgi page, install them and type "/etc/chkconfig arrayd on" . Then either start the array deamon manually or reboot the machine. Nothing more should be required.

There also exists a very nice description about HPC on SGI written by Ayad Jassim, but for some strange reason this document was never provided with the installation.
  Reply With Quote

Old   December 13, 2001, 14:22
Default Re: Help in Loading STARHPC on SGI Origin 2800
  #3
Anindya
Guest
 
Posts: n/a
How can I get hold of the documentation by Ayad Jassim?

Anindya
  Reply With Quote

Old   December 13, 2001, 18:46
Default Re: Help in Loading STARHPC on SGI Origin 2800
  #4
Joern Beilke
Guest
 
Posts: n/a
You might ask the support people in London. Since you do not post your email I cant send you the file.
  Reply With Quote

Old   December 13, 2001, 19:43
Default Re: Help in Loading STARHPC on SGI Origin 2800
  #5
Anindya
Guest
 
Posts: n/a
Please send me the file if you have it. My email is anindya@iastate.edu .

Thanks
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stl from SolidWorks getting the origin right sjs OpenFOAM Pre-Processing 2 July 23, 2008 16:43
where is the origin of a boundary face for udf ma jie FLUENT 1 August 14, 2006 16:21
submit a job on the SGI Origin 3800 Jason FLUENT 0 February 28, 2005 23:30
Coordinate of axis origin Tang FLUENT 0 October 4, 2004 17:38
How to use all the memory in SGI Origin 2000 G.P. Xia Main CFD Forum 3 April 24, 1999 12:23


All times are GMT -4. The time now is 20:13.