CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Stag Pressure less than static pressure

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 1, 2002, 14:50
Default Stag Pressure less than static pressure
  #1
Manu
Guest
 
Posts: n/a
I am modelling a compressible flow model of turbine blade leakage flow. The flow is compressible, transonic and turbulent. I have set stagnation, pressure, symmetry and wall boundaries. The problem is that when the code is run it gives a ratio of stagnation pressure and staic pressure less than 1 at boundary 1(stagnation) message. I am aware that the pressures at the stagnation and pressure boundaries are defined relative to the reference pressure but are they added to the ref. pressure or is that a scaling factor. It seems it is a scaling factor but I am not sure. Similarly for reference temperature is it a scaling factor or is it added to the reference temperature?
  Reply With Quote

Old   May 3, 2002, 07:40
Default Re: Stag Pressure less than static pressure
  #2
john YL
Guest
 
Posts: n/a
Reference pressure and temperature are added to the relative values, so they are not scaling factors.

As for stagnation problem you have, the initial condition seems to be important: the static pressure at the boundary is extrapolated from interior, and when the solution is too far away from real solution, this may happen.
  Reply With Quote

Old   May 6, 2002, 05:10
Default Re: Stag Pressure less than static pressure
  #3
Anton Lyaskin
Guest
 
Posts: n/a
Concerning the reference temperature - it is used only inside the code and during postpocessing. All the temperatures that you specify at the boundaries must be ABSOLUTE.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Static Pressure & Hydrostatic Pressure Liwau CFX 3 April 16, 2023 13:32
Static Pressure in CCM+ Cb Siemens 0 May 12, 2006 06:14
Dynamic pressure at stag point for 3d aerofoil Matt FLUENT 3 January 30, 2006 20:31
Static Pressure Suresh Balasubramanian FLUENT 0 July 29, 2003 21:45
Total pressure to static pressure ratio roadracer Siemens 1 April 17, 2003 06:31


All times are GMT -4. The time now is 22:57.