CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

averaged quantities of incylinder data

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 28, 2002, 13:51
Default averaged quantities of incylinder data
  #1
Jaipal
Guest
 
Posts: n/a
Hai, Iam doing flow analysis in DI DIESEL engine with moving piston and valves..Does anyboday know how to get the averaged quantities of incylinder data??? I want to know the averaged quantities of pressure temperature and all other properties inside the cylinder.can anybody tell about this.. thanks in advance.. urs jaipal
  Reply With Quote

Old   December 29, 2002, 09:26
Default Re: averaged quantities of incylinder data
  #2
massimo
Guest
 
Posts: n/a
You could try with command RAVG, but I can't understand very well your problem. Bye
  Reply With Quote

Old   December 29, 2002, 23:08
Default Re: averaged quantities of incylinder data
  #3
CJ Tune
Guest
 
Posts: n/a
RAVG is an option in the *GET command. You also try out SUMM.
  Reply With Quote

Old   December 30, 2002, 22:31
Default Re: averaged quantities of incylinder data
  #4
tailor02
Guest
 
Posts: n/a
I checked the command manual but found neither RAVG or the same option in *get. what's the problem?
  Reply With Quote

Old   December 30, 2002, 22:33
Default Re: averaged quantities of incylinder data
  #5
tailor02
Guest
 
Posts: n/a
load the value of some variable in one register. load the volume( area) of cset in another register sum up the two registers respectively then get the average data by divide the former with the later
  Reply With Quote

Old   December 31, 2002, 03:58
Default Re: averaged quantities of incylinder data
  #6
Jaipal
Guest
 
Posts: n/a
Hai all, Thank u for fast respone.I got ur point. RAVG is only for getting the avegare of data in the register. SUMM command i will try and see. I have one more doubt can we write a user defined fuction to get the average values of incylinder data. My intention is to plot a incylinder pressure and temperature graphs with respetive to crank angle.. can anybody help me. thanks in advance.

JAIPAL
  Reply With Quote

Old   December 31, 2002, 04:47
Default Re: averaged quantities of incylinder data
  #7
Joern Beilke
Guest
 
Posts: n/a
Have a look at

www.adapco-online.com/feature_arts/star5.html

  Reply With Quote

Old   January 2, 2003, 02:17
Default Re: averaged quantities of incylinder data
  #8
tailor02
Guest
 
Posts: n/a
SORRY FOR making mistakes in my last post. it should be: load the variable value in 1st register.; load the areas or volumns of the cset in 2nd register; multiple the 1st and 2nd acoordingly and save the results in the 3rd register; sum up the 1st and 3rd register respectively; and divide the sum of 3rd register by that of the 1st register , you can get the average value
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Averaged quantities otrebla CFX 0 April 11, 2008 11:03
Time-averaged quantities david FLUENT 1 August 22, 2005 20:46
Mass flow Averaged quantities Fred Siemens 5 July 5, 2005 03:05
time averaged data pradeep FLUENT 1 March 22, 2005 19:48
Time-averaged LES Data jayd FLUENT 1 November 8, 2002 06:08


All times are GMT -4. The time now is 23:06.