CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Negative densities at the start of a run

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 21, 2003, 10:09
Default Negative densities at the start of a run
  #1
nandu
Guest
 
Posts: n/a
Hello,

I am trying to model the supersonic flow between two finite width wedges. The model has approx 250000 elements. I am attempting to run it as an inviscid calculation with an upwind scheme. The solver fails within the first three steps citing 'negative densities found in more than 100 cells as the error'. how can this be rectified, any help in this matter is greatly appreciated.

cheers nandu
  Reply With Quote

Old   February 21, 2003, 12:17
Default Re: Negative densities at the start of a run
  #2
cjtune
Guest
 
Posts: n/a
Try pseudo-transient runs. Adjust time step to taste. Also, try using double-precision. Worked for me.
  Reply With Quote

Old   April 20, 2003, 23:48
Default Re: Negative densities at the start of a run
  #3
azmir
Guest
 
Posts: n/a
Same problem... for my transient moving mesh case. I've tried: 1) changing the time step to be one order to order of magnitude smaller but didn't work. 2) using double precision but didn't work 3) changing all relaxation factors (everything not just pressure) but didn't work 4) all above with 2-3 different values as trial and error and still didn't work. 5) looking into mesh quality possibilities now... don't know yet.

Appreciate if someone with experience could give some tips here. Thanks.
  Reply With Quote

Old   May 13, 2003, 17:18
Default Re: Negative densities at the start of a run
  #4
Dave
Guest
 
Posts: n/a
I've had this problem quite often. From my expirence (I'm a fairly new user) mesh quality is the cause. I've only come across this when using PROAM to mesh.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
negative densities john Siemens 0 March 19, 2008 07:32
Negative Densities shyam Siemens 2 May 8, 2005 07:17
negative densities. Mihir Siemens 4 December 9, 2002 22:04
negative densities Sabatini Siemens 4 January 31, 2002 09:06
negative densities Fabrizio Grieco Siemens 4 October 30, 2000 02:47


All times are GMT -4. The time now is 16:30.