I try to use gtpower to research such a process: A little diesel fuel is injected in the intake port of a diesel engine, and forms the homogeneous mixing air. Most of the fuel is injected in the cylinder as usual.

There are two injectors in my model. One (from InjProfileConn template) is connected to the cylinder , the other (from InjAF-RatioConn template )is connected to the intake port ( from pipe template ). The combustion model in the cylinder is from the EngCylCombDIJet template.

The model I have made can't work well, and the fuel injected in the intake port haven't burnt. I want to know if such a process can be modeled by gtpower.

Hope some experienced user can help me to solver the problem. Thanks.

It can be done. What version of GT-Power are you using?

SW

thanks for your answer, I have gtpower520 and gtpower60

Both v52 and 60 are capable fo doing this. If you need further assistance send me the model directly to my email. I will try to find out what is wrong.

ths, I will sent it to you soon

Mr. Wang,

Which company do you represent? Is this license obtained from CDAdapco?