CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

How Can I create cells from the splines?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 17, 2003, 14:08
Default How Can I create cells from the splines?
  #1
Mahbub
Guest
 
Posts: n/a
Hi! I've a set of splines connected each other that I got from importing a vda file (created by solid work). How can I make the mesh from it? Mahbub
  Reply With Quote

Old   October 17, 2003, 22:18
Default Re: How Can I create cells from the splines?
  #2
firespring
Guest
 
Posts: n/a
You can use metiblock method!You will find it in the chaper 3 of the user guide!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to create a UDF Sean FLUENT 1 June 11, 2008 23:39
create Furkan Oezkan CD-adapco 4 November 10, 2005 10:13
Shell cells to Fluid cells Mahbub CD-adapco 1 October 20, 2003 15:21
Create a Solid Betty CFX 2 August 14, 2003 00:17
UDF: neighbour cells, upwind cells Dmitriy Makarov FLUENT 0 February 18, 2001 14:53


All times are GMT -4. The time now is 19:04.