CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

parameter NCMAXV OR NBMAXV

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 13, 2004, 05:34
Default parameter NCMAXV OR NBMAXV
  #1
Frederik
Guest
 
Posts: n/a
Hello,

after running a computation with heat transfer with constant molecular properties, I want to switch to user coded properties. When I try to restart now, the message is: *** ERROR #210 *** INSUFFICIENT DIMENSIONS FOR THE MOLECULAR VISCOSITY ARRAY.INCREASE PARAMETER NCMAXV OR NBMAXV AND RECOMPILE.

Using the command MEMORY shows, that there are no such parameters.

Any hints are welcome - Frederik!
  Reply With Quote

Old   February 13, 2004, 05:45
Default Re: parameter NCMAXV OR NBMAXV
  #2
Frederik
Guest
 
Posts: n/a
So I found that the parameters are listed in the parm.inc file. After changing it successively to a number that is far above the number of my model's cells, the error still prevails. Still, any hints welcome ...
  Reply With Quote

Old   February 13, 2004, 08:28
Default Re: parameter NCMAXV OR NBMAXV
  #3
Richard
Guest
 
Posts: n/a
You should re-write your geometry and problem files. If there is now a file called parm.inc.new, move it to parm.inc. Then do starlink again (on UNIX) or just rerun STAR (on Windows).
  Reply With Quote

Old   February 16, 2004, 07:52
Default Re: parameter NCMAXV OR NBMAXV
  #4
Frederik
Guest
 
Posts: n/a
Thank you for your answer, I tried your suggestion. There was no parm.inc.new file written. By the way, everything works if cp (SPECHT.F) is user coded, but fails with conductivity (CONDUC.F) and viscosity (VISMOL.F). I also manually changed the values for N(C/B)MAXV in parm.inc to something 10times the number of my cells. This doesn't work either. Is there any documentation on such issues (parameters and sizing) availlable?
  Reply With Quote

Old   February 16, 2004, 09:48
Default Re: parameter NCMAXV OR NBMAXV
  #5
Richard
Guest
 
Posts: n/a
You shouldn't have to edit the parm.inc file by hand, so there's no documentation on these parameters. They should be invisible to you. If you have tried what I suggested in my last posting and it does not work, you've probably found a bug. Contact STAR support.
  Reply With Quote

Old   February 16, 2004, 10:44
Default Re: parameter NCMAXV OR NBMAXV
  #6
Steve
Guest
 
Posts: n/a
If version 3.2 ever gets released, these problems should be a thing of the past.
  Reply With Quote

Old   February 17, 2004, 23:42
Default Re: parameter NCMAXV OR NBMAXV
  #7
http://www.excitecity.com/forum
Guest
 
Posts: n/a
  Reply With Quote

Old   February 21, 2004, 06:32
Default Re: parameter NCMAXV OR NBMAXV
  #8
lxyz
Guest
 
Posts: n/a
Edit your parm.inc file to set NCMAXV=NCMAX and NBMAXV=NBMAX. If your heat conductivity option is not selected as constant, you may need to set NCTMXC=NCTMAX ans NBTMXC=NBMAX as well.

Good luck !
  Reply With Quote

Old   February 23, 2004, 09:28
Default Re: parameter NCMAXV OR NBMAXV
  #9
Frederik
Guest
 
Posts: n/a
I did all of this, it doesn't work I have the impression that the error message itself is misleading.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
two parameter on the same plot ammi reddy FLUENT 0 March 22, 2007 23:47
Kinetik parameter for CO + 0.5 02 -> CO2 Martin CFX 0 January 26, 2006 09:30
using parameter with gambit tone FLUENT 0 October 3, 2005 10:41
NFMAX parameter Sileno Phoenics 2 January 12, 2005 05:42
Penalty Parameter Kai Kang Main CFD Forum 1 March 13, 2001 04:38


All times are GMT -4. The time now is 02:21.