CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

A problem in valve analysis

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 22, 2004, 22:33
Default A problem in valve analysis
  #1
zhpan
Guest
 
Posts: n/a
There is a case for valve analysis .the detail conditions are as follows: (1)spool is tetra mesh and valve sleeve is hexa mesh. (2)spool move 3 mm relatively to sleeve at a speed of 1 mm/s (3)using moving mesh in analysis

I have some puzzles about this case: (1) shall I use ASI method ? (2) can spool be moved by "case.cgrd" through the event step ? (3) shall I couple the spool and sleeve in the events

appendix: spool(»¬·§·§Ð¾) sleeve(·§Ì×)
  Reply With Quote

Old   February 22, 2004, 22:41
Default Re: A problem in valve analysis
  #2
zhpan
Guest
 
Posts: n/a
I especially want to know (3) : shall I couple the spool and sleeve in the events when using ASI method
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
gap between valve stem valve kantharao Siemens 0 September 2, 2008 08:19
Globe Valve Aeroacoustic Analysis Mohammad Kordi FLUENT 0 June 2, 2008 05:18
Pressure drop of valve with valve opening of 30% elogesh Main CFD Forum 2 January 5, 2007 13:30
Valve seal problem! Urgent songxguan Main CFD Forum 0 May 11, 2006 23:04
Flow measurement around intake valve pressure condition problem fedegavo OpenFOAM Running, Solving & CFD 1 January 20, 2006 14:06


All times are GMT -4. The time now is 05:03.