prostar/buttons
 

In my prostar versions some of the buttons are on the wrong place on the screen. Some of the buttons are not even on the screen. Does anybody have the same experience ? Does that anybody have solution?

Thanks in advance

Michiel

Re: prostar/buttons
 

I noticed the same problem in Linux and with the version 3.15 and above. the solution is to make the window bigger with the mouse go to an other file in the guide window then go back then you should be aible to see the buttons !!!

Re: prostar/buttons
 

Hi Yacine,

That's what I found out to but it's not always solving the problems. in 3.2 the problem has become worse.

Michiel

Re: prostar/buttons
 

A screen resolution of 1280x1024 is required for prostar.

Re: prostar/buttons
 

Changing the resolution has no effect. The problems are still the same.

Re: prostar/buttons
 

Maybe I'm not getting the problem correctly, but I had similar problems which then were resolved by introducing

Option "BackingStore" "On"

into the "Screen" Section in /etc/XF86Config

Re: prostar/buttons
 

Hi Michiel, I have the same problem as you with 3.20. It is quite annoying. I hope someone here has the solution for us. Regards Ulf

Re: prostar/buttons
 

Good suggestion tried it but it Didn't solve the problem

thanks for the advice

Re: prostar/buttons --> solution
 

Contact with CD-adapco gave the following working solution( for my suse linux)

downgrade to openmotif 2.1

/usr/X11R6/lib/libXm.so.2.1

for Red-had install

rpm -i --force --nodeps openmotif-2.1.30-4_MLI.i386.rpm \

openmotif-devel-2.1.30-4_MLI.i386.rpm

cheers