CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Siemens (https://www.cfd-online.com/Forums/siemens/)
-   -   Star-CD installation (https://www.cfd-online.com/Forums/siemens/54023-star-cd-installation.html)

littlelz September 10, 2004 09:29

Star-CD installation
 
According to Star-CD installation requirement, the screen resolution is 1280*1024 at least. The max resolution of my TFT is 1024*768. Is there any method to remedy this limit. Is there somebody who meet the same problem during the installation? How do you resolve it?

Thanks ahead!

littlelz

Brian September 10, 2004 14:29

Re: Star-CD installation
 
If you just say "OK" to the warning, it will continue to install. It will most likely even work, with some screen scrolling.

But you won't like it.

littlelz September 12, 2004 07:11

Re: Star-CD installation
 
Thanks Brian.

But in my case, after I choose 'OK', the installation is interrupted. I can't finish installation. So, do you know how to deal with it?

Thanks for!

Brian September 12, 2004 10:50

Re: Star-CD installation
 
If that doesn't work (try it again once to make sure) you're simply going to have to upgrade your graphics.

Dump the rich-kid's TFT, get a real monitor, and try it again. You can always go back to the desktop eyecandy after installation.

Javidan Ahmad September 13, 2004 20:24

Re: Star-CD installation
 
Using a lower resolution than recommended will cause some disturbance to ur wourk - most major contribution to the problem is when you are using the star guide bar which will have some functions and keys you might not be able to press. I had the same problem at university - we upgraded monitors a few weeks later.


All times are GMT -4. The time now is 18:15.