CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

New droplet properties in 3.200

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 4, 2004, 04:58
Default New droplet properties in 3.200
  #1
Joel
Guest
 
Posts: n/a
Hi all I know that 3.200 has been out for a while now but have only just started using droplets in it and all the new options have thrown me off somewhat. Specifically the mass flow rate option on the injection definition panel. Before you could just set a velocity of each droplet particle which was all fine and dandy but now with this mass flow rate thing im a little confused, which actually governs the droplet flow features as by setting diameter and velocity surely the code can calculate mass flow rate (as before) the other problem is that i am having trouble with convergence and want to make sure that my velocity and mass flow rate arent contradicting each other. Cheers (bit of a rambling question im sorry!) Joel
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
droplet evaporation Michael Hahn FLUENT 0 September 13, 2005 07:33
droplet spreading Tie FLUENT 0 July 12, 2005 15:18
droplet size Neser CFX 1 January 26, 2004 14:42
droplet interaction S.Baskar CFX 0 November 26, 2003 09:20
Droplet data Andre' Siemens 0 July 27, 2000 18:36


All times are GMT -4. The time now is 01:30.