|
[Sponsors] |
November 9, 2004, 20:45 |
Warning 519 - Initfi activated but not used
|
#1 |
Guest
Posts: n/a
|
Hello,
I am getting this warning message and the simulation is done with all 0 values and so no result and no output. Warning 519 - Initfi activated but not used How to get rid of this warning and how to run the simulation so that I see some meaningful results and numbers. |
|
November 9, 2004, 21:40 |
Re: Warning 519 - Initfi activated but not used
|
#2 |
Guest
Posts: n/a
|
My guess would be that you have activiated a user subroutine in the problem file and you are not using it. Is it your attention to use user subroutines? If not than remove "user" from what looks like the initialization window.
Kevin |
|
November 10, 2004, 09:53 |
Re: Warning 519 - Initfi activated but not used
|
#3 |
Guest
Posts: n/a
|
i want to use the user-subroutine. but the model was written in version 3.15 and i want to run it in 3.2 but i see that the model is not using user subroutine.
How can I make the user subroutine to work? AB |
|
November 10, 2004, 10:03 |
Re: Warning 519 - Initfi activated but not used
|
#4 |
Guest
Posts: n/a
|
The subroutine is already activated, which is why STAR says "Activated but not used".
This means that bcdefi is activated, but STAR is not using your coding. This is either because it isn't there, or because it is there but it doesn't compile. Check that: 1. the bcdefi.f is in the ufile directory. 2. read the screen output to see if bcdefi has compiled correctly. If bcdefi is in the ufile directory, then chances are it hasn't compiled correctly. If this is the case then STAR gives you the fortran error message. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CAPTCHA extension activated | Jonas Larsson | CFD-Wiki | 0 | June 15, 2007 18:20 |
Warning#42 43 44 | furkan | Siemens | 1 | December 18, 2005 17:23 |