CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Boundary Condition for closed loop CFD Analysis

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 3, 2005, 08:17
Default Boundary Condition for closed loop CFD Analysis
  #1
A.S.
Guest
 
Posts: n/a
Hi,

I am trying to simulate a closed loop flow with conjugate heat transfer analysis. What kind of boundary condition should I give in StarCd to get the flow mass flow rate. I think only 1 boundary conidtion in the loop should do. Please guide.

Thanks

A.S.
  Reply With Quote

Old   January 3, 2005, 09:19
Default Re: Boundary Condition for closed loop CFD Analysi
  #2
steve
Guest
 
Posts: n/a
I don't think you want any boundary condition at all. There are post-processing methods that allow you to sum up the fluxes crossing a set of shells or cell-faces anywhere in the model.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to set the boundary condition for thermal analysis sivakumar OpenFOAM Pre-Processing 0 August 20, 2008 07:45
CFX 2D ANALYSIS BOUNDARY CONDITION fat bug CFX 1 February 19, 2008 17:22
Modelling of closed loop Ananta Phoenics 2 March 13, 2007 03:34
Closed loop wind tunnel. pablo cornejo FLUENT 1 December 12, 2005 05:14
Flow in a Closed Loop John Collins Main CFD Forum 2 February 27, 2003 11:26


All times are GMT -4. The time now is 19:08.