CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

divergence of moving mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 26, 2005, 23:15
Default divergence of moving mesh
  #1
ricklee
Guest
 
Posts: n/a
hi,All: I build a model of moving mesh.A fan in a channel in this model.I use the ASI method to simulate the situation.Besides,unstructed grid is used in the fan and structed grid in the channel.But the solve is always divergence.I think the scale of time and grid is enough.Are there another reasons for the divergence? Please tell me. Thank you.
  Reply With Quote

Old   June 27, 2005, 00:11
Default Re: divergence of moving mesh
  #2
som
Guest
 
Posts: n/a
check relaxation factor and residual tolarence....run ur analysis with reduced those parameters
  Reply With Quote

Old   June 27, 2005, 04:53
Default Re: divergence of moving mesh
  #3
William Blake
Guest
 
Posts: n/a
you might have to underrelax the piso algo:

algo piso node 20 0.15 0.7

additionally you should use switch 60

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Divergence problem - NOT the mesh Carlos FLUENT 1 August 2, 2008 10:38
About the divergence when using unstructured mesh Shamoon FLUENT 2 June 22, 2008 10:00
About the divergence when using unstructured mesh SHAMOON FLUENT 4 June 20, 2008 14:17
Moving Reference frame - UDF - Moving mesh modisa FLUENT 0 April 18, 2008 14:31
AMG divergence and boundary layer mesh Justin FLUENT 0 November 4, 2007 18:24


All times are GMT -4. The time now is 04:52.