CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

heat source in starcd

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 9, 2006, 09:26
Default heat source in starcd
  #1
kirankumar
Guest
 
Posts: n/a
hi friends, in my model one fluid region and four different solid regions are there. these solids having heat source 20,20,40,15 Watts respectively,volume is say a,b,c,d. how to apply these heat source to the solid regions. if you have any subroutine please mention that. thanks in advance. kiran kumar
  Reply With Quote

Old   August 9, 2006, 10:09
Default Re: heat source in starcd
  #2
Ben
Guest
 
Posts: n/a
sorent.f

IF(ICTID.EQ.xxx) THEN S1p = ...... S2p = ...... ENDIF

easy eh
  Reply With Quote

Old   August 15, 2006, 06:39
Default Re: heat source in starcd
  #3
moritz
Guest
 
Posts: n/a
You can define it also with a table (folder Source under folder Thermalphysical Models) and you have just to defin S1P. (always in W/m3, independent from the dimension of your geometry).
  Reply With Quote

Old   September 17, 2006, 20:13
Default Re: heat source in starcd
  #4
azmir
Guest
 
Posts: n/a
Funny, I was having similar problem. Sorent.f was easy but the table was not so easy. I dont understand how to key into the table and what does "independent" mean in that table? Couldn't find tutorial on this one either.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Heat source UDF, please Sasha Fluent UDF and Scheme Programming 4 October 14, 2014 02:32
Conj. Heat Transfer: STARCD vs. STARCCM+ Stefano Siemens 0 September 24, 2007 09:55
heat source Mac Siemens 8 July 15, 2007 01:50
Input heat source (heat/unit volume) in 2D Polly FLUENT 2 March 18, 2005 02:04
Heat-Source James Siemens 1 July 17, 2002 10:33


All times are GMT -4. The time now is 15:30.